rauliruegas
Responses from rauliruegas
| Who needs a MM cartridge type when we have MC? Dear friend: IMHO none. If you like B&O cartridges ( that I like it. ) you could go for the MMC2 or the 20Cl.These tonearms could help you:http://www.audiogon.com/cgi-bin/cls.pl?anlgtnrm&1304621753&/Graham-2.2http://www.audiogon.com/cg... | |
| Uni-Protractor Set tonearm alignment Dear Nandric: I don't have yet the right and precise answers to:+++++ " our capability to ignore the noise " ++++but a priori IMHO I think it is a phsycoacoustic subject and the enormous capacity that our brain has to adapt over time to " continuo... | |
| Uni-Protractor Set tonearm alignment Dear Genesis168: +++++ " Numbers and numbers don't matter. " +++++this is not what I try to explain in my last post. Your statement is to " dramatic " for say the least.IMHO " numbers " always matter if you know where and how matters and its impor... | |
| Uni-Protractor Set tonearm alignment Dear T_bone: I hope that with this post I can finish my intervention on this regard.IMHO all these numbers/calculations for geometry cartridge/tonearm set up is in many ways something " academic " and very informative for the best part.I already p... | |
| Uni-Protractor Set tonearm alignment Dear Pryso: +++++ " I do continue now to wonder if Dennesen considered other alignment calculations and rejected them, or if he simple accepted Baerwald because it was the most well known? " +++++IMHO the precise and true answer only Dennesen coul... | |
| Uni-Protractor Set tonearm alignment Der T_bone: The same happen ( original with higher distortions. ) if the common data is EL ( 246mm ) instead PTS one in either IEC or DIN standards.regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear Nandric: Thank you, yes are the same numbers we are talking about.Regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear T_bone: Yes, I'm using the VE comparator IEC and DIN too for a fixed pivot to spindle distance.IMHO we need at least one calculation data that be the same on all and any calculations, this data is: 231.5mm pivot to spindle that's is what stat... | |
| Who needs a MM cartridge type when we have MC? Dear Acman3: Now with a few more listening hours which are your experiences between that TK3 and the 20SS stylus? what could we wait when listening to that combinations?, thank you in advance.Regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment T_bone: because the last link using the FR numbers with the offset angle you states still shows different distortions numbers to the ones you posted.Why is this?, I assume you have the answer. Thank you.regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear T-bone: According with Nandric those FR numbers comes from: 1984 German Magazine 'Das Ohr' that I can't find it on the net to read how comes the numbers.IBtw, I'm still waiting what I ask you before. Thank you.Regards and enjoy the music,Raul. | |
| Uni-Protractor Set tonearm alignment Dear T_bone: Re-reading your post I found out those offset angles: 20.325/20.574 that I don't take in count ( I use the ones that gives the " natural " calculations, not forced ones. ) due that I use the VE calculator instead the comparator tool.B... | |
| Uni-Protractor Set tonearm alignment Or the links for your calculations if are different from the VE tools.Thank you again.Raul. | |
| Uni-Protractor Set tonearm alignment Dear T_bone: I'm confuse about your numbers.In this link there is the calculations with graphics for 245mm EL:www.vinylengine.com/tonearm_alignment_calculator.php?mv=&l=e&ev=245&i=i&c1=60.325&o=i&c2=&cal=1&submit=ca... | |
| Who needs a MM cartridge type when we have MC? Dear three of you: Thank you for each one answer.Acman3, I will post when I have on hand the Signet cartridge: I don't have it yet.regards and enjoy the music,raul. |