pbnaudio
Responses from pbnaudio
Makeshift tonearm for under $800 The Jelco is a very nice arm, and it mates very nicely with a Denon DL103R cartridge , you could do both new for about your budget target.Good listeningPeter | |
Modification that has proved to be transformative Duelund Capacitors are indeed great - but expensive - if they were to be used within the regular retail chain they would add about $6000 to the price of the equipment they were installed in - in your $ 1200 cost scenario.You should try the Jupiter... | |
Should I upgrade to a Manley Chinook phono pre-amp Have you considered the Liberty B2B-1 ?I make themThanksPeterLibertyMore Liberty | |
DIY turntable plinth material SemiShoot me an email and I can send you some pictures of others we have madepbnaudio@me.comThanksPeter | |
Krell Granny,When you replaced the capacitors on your two solid-state pieces, did you use a equivalent capacitor or a better one. If equivalent, and an improvement in sound - then you replaced a older dried out one with one that was up to spec and there... | |
new cart and Where's the bass ? Is is set up correctly on your table ? | |
DIY turntable plinth material Turntable Plinth | |
Krell Granny,First thanks for keeping this a civil discussion of opinions unlike others that have chimed in on this thread.I took a look at your earlier posts and reviews and it appears that you favor tubed equipment where in some cases the power supply... | |
Krell Audiofail I'm in absolute agreement !Good ListeningPeter | |
Krell Granny,I get that one can tell a difference between wires , interconnect and speaker cables that is - power cords - well - if of decent gauge and with quality connectors - then not so much. I can certainly also agree that proper mechanical isolati... | |
Krell Audiofeil, Thanks for the compliment - Good listeningPeter | |
Krell GrannyI'd love to have you in a double blind test on PS capacitors in a power amplifier - large electrolytic ones - if you can tell any difference from a Cornell to a Mallory to a United Chemicon, Rifa, or any other reputable manufacture and repea... | |
Best Methods For Removing Dust From Drivers...? Cone drivers, just use a microfiber cloth or a duster- gently - they really are not that fragile.Dome tweeters are fragile so use canned air or similar don't spray directly on the dome but across it - that should do the trick.Ribbons - stay away -... | |
Krell Sounds like a electrolytic power supply capacitor - sincerely doubt if you have anything to worry about, if installed originally by Krell I'm sure they meet spec. most of these come in standard values and sizes from many different manufactures.Mec... | |
North Acoustics Kitty Kat Revelator Hello BrewsterDon't know your budget or if your planing to do some assembly yourself - I've just completed a kit design for the nice folks at ScanSpeak it will go up on our website this week I hope. The kit will be available through Madisound as w... |