pbnaudio
Responses from pbnaudio
| Thoughts on SME 10A Din to XLR is easy, there are several options on ebay, balanced phono is the way to go. If you need to the SME cable is easily re-terminated with XLR's, any tech should be able to do this for you - if not send it to me and I can do it for you. I s... | |
| Thoughts on SME 10A The SME10 is a great table, have had a few of them through here over the years. Agree with above regarding arm, the better the arm the better it will sound. Best of luckPeter | |
| Need a recommendation on an interim power amp An Old Soundcraftsmen PCR800 would do the trickGood ListeningPeter | |
| THE GREAT AC OUTLET SHOOTOUT. Geoff and KMRelax guys we'll get to it when we get to it - the jig is still sitting ready for the control system to be finished, have to tend to paying customers first :-)Good listeningPeter | |
| Want too buy a sansui G9000DB Here is one for sale SansuiBest of luckPeter | |
| What's your oppinion on bridging two channel amps? Bridging or differential mode got a back wrap way back when SS amps were in their infancy. If properly implemented in my experience it is a vastly superior way to operate an amplifier. All my amplifiers are designed so that they can be operated as... | |
| $ 0.00 offers permitted? Or just a way to start the conversationGood listeningPeter | |
| ps audio bridge Have the Bridge and have very few issues with it, Only one being that the screen on the DAC garbles up from time to other, only way to fix is to reset DAC by unplugging. I have the original DAC not mk2, may be fixed with that - ask PS Audio.Good L... | |
| Cryogenic experience wanted. Constructive please Did some investigation regarding the permanent effects of cryogenic treatment of wires, and it is a almost permanent effect. The wire will change slightly from bending it but not change back to its original form. This according to a few local trea... | |
| x-over resistor replacement query Order 2 ea 22 Ohms or 3 each 33 ohms and place them in parallel for a 11 Ohm value.Good ListeningPeter | |
| Alnico or not alnico ....... what is the bisible d Alnico Drivers from JBL have a bowl shaped closed magnet assembly. Ferrite Drivers typically have a Rubber Dress ring covering the magnet it self with the back more contoured. Go to ebay search JBL woofer and it should be pretty obvious. Some folk... | |
| Cryogenic experience wanted. Constructive please Had an entire Olympia LX preamp with its CPS power supply cryogenically treated Olympia LX There was maybe a very small increase in transparency in the sound produced by the preamp after the procedure.As far as treating cables is not money well sp... | |
| phono pre suggestions Liberty Audio B2B-1 and Yes I do make them :-)LibertyGood ListeningPeter | |
| The Demise of the Hi-End Audio Store Harri009The Soundstation Bartlesville OK is another excellent store in your stateGood ListeningPeter | |
| inserting 2 channel preamp When ever setting up a combined system (HT and 2CH) emphasis is always put on the 2CH then the HT is the add on. Feed the L/R of the receiver into a input on the 2CH preamp, if no HT by pass just use a fixed setting on the volume knob for the HT R... |