pbnaudio
Responses from pbnaudio
Pheonix Engineering Road Runner LewmYes indeed - the Denon DD's are very precise - I use the Tachometers on the DP80 Professional and the DN308 Professional. The reading is 33.333 with the last number varying a slight bit, they all lock in at "their" speed, which can be 33.334... | |
Pheonix Engineering Road Runner In the next few weeks - Ill post ads here on AG once they are done.Good ListeningPeter | |
Pheonix Engineering Road Runner Stingreen Yes its only a speed indicator, it does not control any associated motor drive functions. I have used quite a few of the Roadrunners in my DD tables, so when Bill closed shop I needed to find a replacement, none were available so we had... | |
Pheonix Engineering Road Runner The exact same way, a small magnet is placed on the platter which in turn is read by a magnetic switch placed on the plinth. We plan to sell these at $299.Good ListeningPeter | |
Pheonix Engineering Road Runner We have designed a Tachometer that displays RPM to 3 decimal points like the RR and will offer it for sale soon - it will however not communicate with a power source to correct speed issues. it’s accuracy is 5ppm better than the RRGood Listening ... | |
Preamp Upgrade https://libertyaudio.com/service/b2b-2-line-level-preamp-dac/From its makerGood ListeningPeter | |
Can you run the HANA SL MC at 100 ohms? The MC load setting in your phono Preamp is set by a fixed resistor - just change it if you know how to, if not have someone that does do it. Good ListeningPeter | |
Amps that bring liveliness to low efficiency speakers? ^ I have one of those - in need of repair :-)Good ListeningPeter | |
Accuphase Vs Parasound Accuphase is excellent - However you already have Yamaha so take a look at their A-S series integrated amplifiers, excellent sounding machines.Good ListeningPeter | |
On the fence about Vinyl need a good phono stage for A/B testing http://libertyaudio.com/service/b2b-1-all-fet-phono-preamplifier/Another optionGood ListeningPeter | |
Anyone have feedback on Audiogon's Insider membership? I was a "insider" for a short while, AG at the launch put some dealers as "insiders" however I got booted quickly :-) inquired as to why, got the answer that one must pay on top of what we as dealers already pay monthly for the "privilege" of se... | |
Help with DIY dedicated circuit If you have to ask how to connect wires within a junction box I’d suggest getting professional help.Best of luckPeter | |
DIY - Two kits using similar tweeter to Tekton http://www.pbnaudio.com/speakers/speaker-kits/xmaxHeres another oneGood ListeningPeter | |
Top resistors https://www.parts-express.com/mills-5-ohm-12w-non-inductive-resistor--005-5 | |
Best used speakers under $10000 http://www.libertyaudio.com/products/x-vox-loudspeaker-systemFrom its maker Good Listening Peter |