pbnaudio
Responses from pbnaudio
| Plinth ideas for DENON PD-80 DD turntable I use Royal Purple Synthetic lubricant for lubrication of the bearings.https://www.royalpurple.com/product/synfilm-recip-100-reciprocating-air-compressor-oil/Good ListeningPeter | |
| Plinth ideas for DENON PD-80 DD turntable Your all welcomeClarification - the 50/60 Hz switch only function is to add capacitance to the motor capacitor nothing else. And all units are 100V so a step-down transformer is required for long term reliability. Good ListeningPeter | |
| Plinth ideas for DENON PD-80 DD turntable chaksterThe bottom bearing "holding" plate comes off by removing 3 screws, so its pretty easy. I have added 3 photos on the Systems page for the DD tables. The last three ones https://systems.audiogon.com/systems/6431Good ListeningPeter | |
| Plinth ideas for DENON PD-80 DD turntable Chakster - I use the Boston mat on my DP80 it works great.Another mat that needs investigating is the Acromat from funk firm.As far as using CU mats on the DP80 i don't think its a good idea they are too heavy for the spring suspended inner platt... | |
| Plinth ideas for DENON PD-80 DD turntable I think your confusing the mater - the metal parts of the platter is dual coupled by leaf springs - the mat - the rubber thingy 🤣 has the label relief.The two metal platters are isolated by foam pads around their circumference by foam pads - 6 or ... | |
| How come Horn + woofer designs are not more popular? Once you have listened to a properly designed Horn with a State of the art compression driver behind it - there is no way you can listen to a 1"dome tweeter again. :-)https://pbnaudio.com/m25-loudspeaker/Good ListeningPeter | |
| Recommnedation for the BEST SOUNDING integrated amp up to $3500 https://www.usaudiomart.com/details/649524227-nad-m12-and-m22-state-of-the-art-components/Heres another option - and yes I’m the one selling them 🤣Good Listening Peter | |
| Recommnedation for the BEST SOUNDING integrated amp up to $3500 Yamaha AS3000Good Listening Peter | |
| Plinth ideas for DENON PD-80 DD turntable https://systems.audiogon.com/systems/4923#&gid=1&pid=18Like this :-)Good ListeningPeter | |
| Plinth ideas for DENON PD-80 DD turntable Lewm The DN308/DP100 Motor is quite a bit larger than the DP80 one. Ill post a picture of the 308 motor on my systems pageGood listening Peter | |
| Plinth ideas for DENON PD-80 DD turntable Agree with Lewm, the DP80 is a fantastic machine. The rebuild of the electronic circuit is relatively simple, have done a dozen or more in the past year or so.Some time ago i posted a video showing the speed accuracy of the DP80 playing an entire... | |
| Plinth ideas for DENON PD-80 DD turntable Lewm I have tried coper mats on the DP80 and the springs (thin metal bands) are not sturdy enough to carry the copper platters unless very thin. Any mat should be not any larger than the inner spring loaded platter - Denon's original Rubber mat ... | |
| Plinth ideas for DENON PD-80 DD turntable Genesis,The Motor in the DP75 is considerably smaller in the DP75 and the control system simpler, both are excellent machines.The DP75 and DP80 are not suitable for use with a copper mat as the platters are two layer spring loaded the weight of th... | |
| Plinth ideas for DENON PD-80 DD turntable https://pbnaudio.com/pbn-dp80/Good ListeningPeter | |
| Caps for tweeters under $300 http://www.humblehomemadehifi.com/Cap.htmlHeres is someones opinion on capacitors Good LuckPeter |