mofimadness
Responses from mofimadness
| Volume affected by uneven lengths of spker cable?? Here's a thread from a couple of months ago on the same issue:http://forum.audiogon.com/cgi-bin/fr.pl?fcabl&1362055085&read&keyw&zzequal+speaker+cable+lengths | |
| Entry-level speaker cables Agreed. Canare 4S11. I run it on my he-man rig and couldn't be happier. It replaced some very expensive cable. | |
| VPI cartridge install f/phase inverting pre No. Only one swap. | |
| Speaker for modern/alt rock music JBL L100 or 4311 Studio MonitorsPioneer HPM100The Klipsch recommendations are good also. If you have a large room, the Snell AIII's are great. | |
| Can anyone identify the little black speakers ... I agree with Vapor1, it's not a Cantus. My first thought was also a DIY. | |
| Help Parasound Belt driven transport Steve Sank has worked on my CEC TL2 transport and did a marvelous job. Highly recommended.http://www.thuntek.net/~bk11/home.htm | |
| Best Rock Album in 2013 Not really rock per se, but the new Boz Scaggs "Memphis" is my favorite. | |
| Sensitivity Definition: Speaker sensitivity is a measurement of the amount of sound output derived from a speaker with one watt of power input from an amplifier. Sensitivity is usually measured with a microphone connected to a sound level meter placed one met... | |
| Identify this hum, please Try the cheater plug on the preamp and also try a different set of interconnects from the preamp to the amps. | |
| HELP PICKING NEW TURNTABLE Rega, unless you afford the aforementioned VPI. | |
| Lottery Winner would buy what kind of Stereo Gear I'd buy the MBL reference system and have a custom house built with a custom sound room to put it in.http://www.youtube.com/watch?v=EN0fkNp4WLs | |
| Amp suggestions for $1000 Belles 150A "HotRod"McCormack DNA.5 or DNA 1Sonographe SA250 or SA400Forte 1A or 4A | |
| Anyone own or listened to this cd? Never heard of this album. I just loaded it into my MOG queue. I'll listen to it later today. Thanks for the heads up. | |
| Lp storage - location? Tom...thank you! That was really neat. I'll try to find the complete documentary.Just think if every college/university had this kind of room and program? | |
| How to get balanced inputs working You might try to "reset" the 5011 back to factory settings. 8.1 Resetting to factory settingsFollow the steps below to reset your preamp to the factory settings:1. Switch the preamp off.2. Press and keep pressed the fourth button on the right side... |