mofimadness
Responses from mofimadness
| Any Tips on Buying? Even if you "Made An Offer" the "Buy It Now" takes precedent over that offer. You still would have lost the sale. | |
| What's your latest album purchase? I spend between $300-$500 a month on vinyl, but here are my recent purchases:Los Lobos-Kiko on MOFIThe Gaslight Anthem-The "B" SidesLucinda Williams-Lucinda Williams (Red Colored Vinyl)David Bowie-Rebel, Rebel (7" Picture DIsc) | |
| has anyone else experience this..... There is something wrong with the tubes, (they might just be worn out? How used is used?) or your cj PV-10 just doesn't play well with them or you just don't like them. Maybe time to move on.Sorry, but what you describe, isn't what I have found to... | |
| Pioneer HPM-100 Tweeter and Suptw. Level Control ? From the manual:Level ControlsIndividual controls are provided for the MID and HIGH frequency ranges, and when set at "0" a suggested output characteristic is obtained. Turning either control clockwise increases the output from that speaker, while... | |
| has anyone else experience this..... How much time do you have on the Mullards? They need at least 40-50 hours to burn in.I use Mullards almost exclusively and have never found what you state to be the norm. Maybe new, right out of the box, but never after they've burned in.Give them... | |
| Help matching a cartridge to a phono preamp After looking at the specs of the M1, IMHO the .21mv version would be right on the cusp of not working well. It also depends on how much gain your preamp has through the line stage, but unless it's a lot, the 1mv version will definitely work bette... | |
| Magnepan DWM problem I was a Magnepan dealer for many years. This is called "panel slap" and indeed does happen if the panel is overdriven or if the source material has really, really deep bass and played loudly. I've heard this happen numerous times.Electrostatic spe... | |
| SME 309 Headshell Postition You push it in to contact/compress the springs. Then align the bolt with the slot in the front of the arm.Vinyl Engine has the owner's manual. Page 15 shows the headshell install details.http://www.vinylengine.com/library/sme/309.shtml | |
| What was your first 'hi-end' system? First System (Early 1980):Hafler DH-101 PreampHafler DH-200 AmpDCM Time Windows (original) SpeakersLinn LP-12 TableInfinity Black Widow TonearmGrace F9E CartridgeThen I got into the High-End business and all bets were off. I've owned so much diffe... | |
| Problem with Mog I've been having the same issues over the past month or so on all of my Squeezebox devices and computer. MOG is going away, (forever) on April 15th, so I think they have just abandoned the system instead of putting any money into it to maintain it... | |
| Boarding school or duct tape? I was really lucky. The first three words my two kids learned were: NO...Daddy...Stereo.I never had any problems, but had many customers of mine, (when I still had my audio stores) with horror stories. I could probably write a book... | |
| Ribbons or electrostatic speakers with SS Amp? I tried a XA30.5 on my Martin Logan CLSIIA's and it sounded great, however, no where near the power that I needed. I do have a bigger room and listen a little loud, (but not overly so).I also tried a pair of the XA60.5 monos and still I thought th... | |
| Vinyl ratings for audiophiles Analog Planet, Mikey Fremer's website had some excellent reviews of audiophile vinyl:http://www.analogplanet.com/category/album-review | |
| New cartridge no sound Make sure the connector from the tonearm to the junction box is plugged in all the way. It should kind of "snap" in. It might look like it's plugged in, but make sure it really is.Also make sure the stylus is pushed all the way into the cartridge ... | |
| Condition of speakers Souljasmooth...I completely agree with you. What I have found is that people will tend to turn, (toe in or out) the speaker not the stand and that is what causes the marring on the bottom. Some stands are really heavy when loaded with shot and/or ... |