kr4
Responses from kr4
Anyone using the analog inputs from the processor? Why would you do this? It encumbers redundant A/D/A conversions.Kal | |
HDMI vs 5.1 analog connection OK. Then the issue of whether HDMI or 5.1 is "better" depends on whether you want to use the DSP/bass management in the processor. I believe that, with modern equipment, it is advisable to use HDMI and let the processor handle as much as possible. | |
HDMI vs 5.1 analog connection 1. The issue of whether HDMI or 5.1 is "better" depends on the signals you are concerned with (does your player decode and/or transmit the HD audio tracks?) and whether you want to use the DSP/bass management in the processor. I believe that, with... | |
Blue-ray player with good 2ch sound? What are you connecting the player to? | |
11 Amps, 1 TV, 3 Components...1 Receptacle Help It is unlikely that all of that will be happy on a single 15A line, especially if your new HDTV sucks power. OTOH, it may be possible, with an ammeter, to find out what all those things draw.That said, running 2-3 new 20A lines from the breaker bo... | |
surround speakers to match Meridian P350W For the center, you should stick with Meridian but you can experiment with the others.Kal | |
Room Correction Hardware options ? Audsyssey Sound EqualizerRives PARC | |
Is it possible to divide digital output ? TV/RF splitter should to it for each device.Kal | |
adding a sub Get a sub that will take the L/R RCA outputs and provide L/R high-passed outputs for the input to your amp. There are many.Kal | |
Voltage output Because the devices they drive are voltage sensing, not current sensing.Kal | |
Splitting the signal from the dac Not quite the same since we are concerned with voltage, not power, here. The answer depends on the output impedance of the DAC and the input impedances of the two loads.Kal | |
Mark Levinson Repair http://www.marklevinson.com/support/support-form.asp | |
Sonically matched speakers The sound the same or, if you are comparing them to others, they sound alike.Kal | |
most effective bass traps GIK, SensibleSoundSolutions, ASC, RealTraps, etc. use compressed fiberglas which is very effective. Foam is generally less effective for bass, especially. As I said above, see the data at www.realtraps.com or look up the Wikipedia article on bass ... | |
most effective bass traps See www.realtraps.com Lots of data there.Kal |