jea48
Responses from jea48
Isolated Ground causes ground hum. What do you think about the use of Isolated Ground Receptacle in this case.Thanks First, what is an IG, (Isolated Ground) receptacle? A receptacle where the female equipment ground contact is isolated electrically from the receptacle supporting b... | |
Isolated Ground causes ground hum. Hi Experienced Goner.I am adding the isolated ground into my music system and when I connected the ground wire into my existing system and it hums badly.Did I do st wrong? Thanks Calvin dangcaonguyen12-19-2018 7:34pm dangcaonguyen OP113 posts12... | |
Why Power Cables Affect Sound @ mkgus OP This may help you to better understand "the why do".https://www.gcaudio.com/tips-tricks/why-power-cables-make-a-difference/. | |
A problem with AC Power you may not have considered. Either way, I don’t see any AHJ issuing a permit for residential use of this equipment. Agree.If you read NEC Article 647 it clearly states 60/120V power systems are approved for use in commercial and industrial occupancies. Period..... NEC 647.3... | |
A problem with AC Power you may not have considered. spatialking OP118 posts12-15-2018 1:31pm Do be aware if you spring for this - currently there are no NEMA receptacles or plugs designed for balanced 120VAC power. See NEC 647.7 (4) Exception: Receptacles and attachment plugs rated 125-volt, singl... | |
To buy grounded or not to buy grounded. That is the question. jab431 posts12-14-2018 11:33amPS Audio made a power cord where you could unscrew the grounding pin. Yes. PS Audio states the grounding pin should only be removed for testing purposes only. Basically covering their butt. Audio-envy on the other ha... | |
To buy grounded or not to buy grounded. That is the question. towertone24 posts12-12-2018 7:24pmLet’s establish a few electrical facts first;If a piece of equipment comes with a two-prong (hot and neutral) plug then the chases is bonded and passes any short to the neutral. The chassis is bonded to what? Not... | |
To buy grounded or not to buy grounded. That is the question. cleeds1,813 posts12-12-2018 2:09pm stereo5 said:I would bet those ungrounded cords are not U L approvedThey’re probably UL listed. There’s nothing inherently unsafe with a two-prong power cord. It’s using it on a device that is designed for a co... | |
To buy grounded or not to buy grounded. That is the question. + 1 what cleeds and spatialking posted. "DescriptionNon-grounded cord (Ungrounded, the ground wire is removed from cord, with G-plug still intaked) Power cord is not Listed by any 3rd party testing laboratory. in case the hot or neutral wires som... | |
Lowering House Grounding Impedance builder3119 posts12-08-2018 6:30pmJim, interesting, and I don’t know the answers. I wish I had a better understanding of the real world differences and interactions of the grounded (neutral) and grounding conductors. Thanks for the link, I’ll ch... | |
Lowering House Grounding Impedance builder3116 posts12-07-2018 8:36pmWhat you described is the code requirement currently, as I understand it. The grounding connection is a safety requirement. Barring an electrical issue, it shouldn’t be doing anything at all. Again, that’s how I... | |
Lowering House Grounding Impedance spatialking95 posts12-05-2018 11:19pmI have. I added a clean ground to my system, rather than use the house ground. I was amazed at how clean FM reception became. I had two FM tuners, one analog and the other digital but both improved significant... | |
Going to have a dedicated line installed- What should i know to ask for? dumbeat OP71 posts11-27-2018 3:11pmIm in Brookly NY. Should have mentioned. Just a guess, the electrician will not pull an electrical permit? $300 for each dedicated circuit would cover the material. His labor must be free.Though the NEC is the e... | |
Help! 220 to 110 The answer, I think, is to find a silent, safe and audiophile quality autotransformer, a single box solution that would allow me to simply plug the transformer into the wall, plug the power conditioner into that, and then all my gear into the con... | |
Replacing/Upgrading AC Outlets The Hubbell 8300 has a different face material and its contacts are nickel plated; apparently the nickel plating will give the receptacle a slightly more forward presentation. Some will say that the nickel contributes a "brightness". The old stoc... |