jadedavid

Responses from jadedavid

Russian Tubes or Old "American" Tubes (built where ever)?
P.S.  I forgot to mention to do a search for "Joe's Tube Lore". He has done a rather extensive shootout of several different tube families. His results are a good read and a good starting point. Remember, your results will/may vary from his. But H... 
Russian Tubes or Old "American" Tubes (built where ever)?
Put the Russian's in and see what you think. It's system synergy that we all search for with all of our equipment/part choices.What works for you may not be good for someone else.Consider tubes in audio like spices in cooking. Different tubes will... 
Recommendations please for good, affordable pre-amp for system?
Sorry, I am not very familiar with either of these pre's. However both companies are highly respectable. Perhaps another member that has some experience with either of these products will chime in.Good luck on your journey. 
Recommendations please for good, affordable pre-amp for system?
Need a little more info. Tubes or S.S.? What is your budget? Remote control? ETC 
Aesthetix Calypso: Bugle Boys vs Mullard 10M
I have not had the 10m's but when I had my Calypso I rolled many tubes thru it. It responds well to tube rolling and you are able to customize the sound to a great degree. I preferred 5751's over 12ax7's. Slightly lower output but with the dip swi... 
Tube preamp for under $3000
Well Pal, have you made a decision yet? If so, what did you get? And why? 
Tube preamp for under $3000
Having had an Aesthetix Calypso, I would not recommend it. I thought it was great at first but as my system and ears matured I could clearly hear the faults. Most notably noise. Not from the tubes, as I rolled many. The best way to describe it is ... 
DAC drops out when Furnace starts or stops. HELP
Thanks to all for the suggestions and info. After listening again tonight I have had no drop outs with the 2nd digital cable in place. However I think "Almarg" has hit on the root cause.I have been constantly fighting a ground loop hum that I cann... 
DAC drops out when Furnace starts or stops. HELP
OK, so I started by changing the digital cable (it was the easiest). I had been using an Audio Envy cable that I really like. Had it about one month. After inserting it into the system I had an occasional drop out but didn't think a lot about it. ... 
DAC drops out when Furnace starts or stops. HELP
good suggestions. Thanks. I will look into it tonight and report back with results. 
comparison of different dedicated AC line types?
Thanks for your responses. I am capable of running the wiring myself as I was a mechanical contractor. Thanks to Lak as you have done what I was interested in. I think I will run two different ones to see if I notice any difference in my setup, th... 
Bryston amps Bridged3B's or 4B?
Thanks for your responses. To Twoleftears, great idea, I will try that. To Rwwear yes my 3B has a bridging switch also. I have Vandersteens and I don't know how the speaker load varies.