inpepinnovations1e75
Responses from inpepinnovations1e75
| Vinyl lovers--in case you haven't tried this yet When I get the flu, my hearing gets so affected that I don't trust any differences in any sounds that I hear! In other words, when I have the flu, everything is mono and sounds worse - sometimes only one channel works - one ear is blocked. Have yo... | |
| Cable Break-in....again? Shadorne, I like it, but don't worry it will start up again in another thread!Bob P. | |
| tt setup problem? Try increasing the VTF a bit, that might be all you need. | |
| Is live reproduction the goal of audio? Live reproduction is my goal, but unfortunately it isn't for the producers of the software, i.e. the recordings.Bob P. | |
| Installing cartr.:slide it all the way to front? Dougdeacon, the BPS stylus to mounting screw distance is 8.2mm.Bob P. | |
| Installing cartr.:slide it all the way to front? Dougdeacon, my rega300 installed on an AlexMkIII has the following geometry. Pivot to spindle at 222mm and stylus nulls are at 64mm and 120mm, which seems to be close to the figures that you have mentioned. Cartridge is a BPS. I thought that those... | |
| Is live reproduction the goal of audio? Marco, well said.Let's ask the question 'Is the goal of home cinema the goal of presenting the authentic or real version of visual events'? The answer to that can serve as the answer to the audio version of that question.Bob P. | |
| Cable Break-in....again? Nsgarch, I am relieved to see that your 'musings' were with your tongue planted in your cheek! Let the marketing continue and I shall continue my listening with non-directional cables (except for the shielding, of course.Bob P. | |
| Listening Fatique- componet or speaker issue. Again,daimbert, what is the SPL level of your higher than normal listeniing? Since we don't know what 'comfortable speech' level is, we don't know what higher than normal is. Perhaps comfortable speech level is quite high because your hearing is i... | |
| Cable Break-in....again? Nsgarch, once again, I see that you think that signal current flows only in one direction or that the polarity of a signal doesn't change. Actually a signal at 100Hz changes polarity 100 times in one second. If it didn't, how would you expect the ... | |
| how to deal with corrosion Methinks that your arm is not stainless steel or the 'rust' spot cam from something else dripping on it or something. At any rate, just use vinegar to clean off the spot. If the arm is stainless steel, then no protection is necessary for normal us... | |
| Listening Fatique- componet or speaker issue. daimbert, you never did mention what your 'higher than normal' sound level was. Your symptoms sound (pun intended) like you are playing at too high a volume and your ears are simply shutting down, causing the fatigue and the 'boxy' sound. Nothing ... | |
| When is unequal, equal? Nsgarch, are you saying that signals in cables (IC or speaker)are not AC?I understand perfectly well the concept of using a shield independent of the signal carrying conductors and the need to connect it in a 'star' ground configuration. That was ... | |
| When is unequal, equal? Nsgarch, I find the notion that cables should have a direction or that the 'positive' and 'negative' conductors should be of different construction or material to be pseudo science, since signals transmitted over cables (IC, speaker etc) are AC, t... | |
| When is unequal, equal? Nsgarch, oh I think that he would agree with me, but my way of stating these things doesn't help sell cables, while his version of these same effects (or non-effects) and claim that these are audible and his solution to this 'problem' does sell ca... |