imhififan
Responses from imhififan
| adding a stereo amp and pre- amp to an existing home theater set up Can a sub be integrated into the 2-channel set-up as well as the HT set-up? The most simple way is connect the sub to the 2 channel set up via line level or speaker level, on the HT side, configure the front L & R speaker to Large/full range... | |
| Manuals for TAD-1000 and TAD-150 I found those at audiokama, maybe you already got that?Bias setting procedure http://audiokarma.org/forums/index.php?threads/need-help-with-tad-1000-monos.601218/https://www.dropbox.com/s/j0rn8zg0aqe8hao/tad-60-1.pdf schematic http://audiokarm... | |
| Looking to get into tubes on the cheap You are talking Patek Philippe, Rolex?We are taking Seiko,Timex! | |
| Looking to get into tubes on the cheap tho a very high SQ amp will cost more Totally agree, same for solid state!Btw, if you own a pair high efficiency speakers, tube amplification can be quite inexpensive. | |
| Looking to get into tubes on the cheap @papalotes Are those resistors welded or just screed on the RCA plug? http://www.alltraxinc.com/images/Resistor.JPG | |
| What is your favorite budget audio component? Denon DL103 Revel Concerta F12 | |
| Looking to get into tubes on the cheap Most of the tube amp need to has a load on output when it is ON, So add a 150ohm 10W resistor across each the tube amp outputs is a good " insurance " Just connect the resistor to the tube amp speaker output + and - terminals. https://robrobin... | |
| Looking to get into tubes on the cheap @papalotes, Just connect the resistor to the tube amp speaker output + and - terminals. | |
| Looking to get into tubes on the cheap Using a speaker switcher in revert can manually do the switching between AVR and integrated amp, but have to be sure that it won't accidentally push the buttons to A+B on the amp switching side!And most of the tube amp need to has a load on outpu... | |
| Why does my system now have shrill top end. The equipment in my system (listed below) has not changed but I now find on both CD and Vinyl a high end shrillness to the sound (treble is very harsh) that has become very annoying, especially at high volume levels. On both channels? | |
| connecting a sub-woofer to a preamp Is it what you have?http://www.laaudiofile.com/images/seismic12b.jpglooking for a line level stereo to mono adapter?https://www.amazon.com/S2M-unbalanced-balanced-terminal-connectors/dp/B013F6FSRK | |
| Rear Channel fill My Denon AVR has Multi channel stereo mode, the front left channel signals are output to the surround and surround back signal left channels, the front right channel signals are output to the surround and surround back signal right channels, an... | |
| New Marantz AV7703 missing an audio fomat Which audio format today comes close to PL II? Dolby Pro-logic IIz and DTS Neo:X / DTS Neural:X http://us.marantz.com/us/Products/Pages/ProductDetails.aspx?CatId=avseparates&ProductId=AV7703 | |
| Looking to get into tubes on the cheap I won’t recommend using the AVR as a preamp for 2 channel music, IMO, using a tube integrated amplifier with a speaker switcher like the Niles SAS-1 is a better way to experiencing tube "magic" | |
| Needing a Manual for B&K Ref 70 There's a AVR707 user manual in pdf @ manualslibhttps://www.manualslib.com/manual/745932/BAndk-Avr-707.html?page=5#manual |