hgeifman
Responses from hgeifman
| Your opinion members of the sonics of the Bricasti M21 and Berkeley Alpha Reference 3 @garebear, Another advantage of the Bricasti M21DAC is that it can be connected to the Internet. Once detected by your network via a wired ethernet, the M21 is recognized as a DNLA device and becomes a powerful media renderer offering pristine d... | |
| Your opinion members of the sonics of the Bricasti M21 and Berkeley Alpha Reference 3 @garebear, I cannot answer your question if you should purchase the Bricasti M21 DAC or the Berkeley Alpha Reference 3. The answer depends on your budget, audio goals, what you are trying to accomplish, your existing equipment, your listening room... | |
| Aurender A10 help I give up. I have no clue why you are not getting sound. Please contact The Music Room and I also suggest an Aurender Remote Support request. Thanks. | |
| Aurender A10 help I found this in the A10 manual: “If the Aurender is being used with a preamp or integrated amp that has volume control, it is recommended to turn "Use Direct Output" ON so that Aurender's DAC-level volume control is disabled. In this case the pre... | |
| Aurender A10 help Please send Aurender a remote support request from your Conductor App: “In many cases, if your Aurender is having problems, Aurender can diagnose and fix any issues via our Remote Support service. To send a Remote Support request email, open the... | |
| Aurender A10 help Please also check your volume control on the A10. The Manual says: "7. Volume Knob Manually adjust the DAC-level volume control. A10 Volume control can be configured or disabled in the Advanced 2 section of the Settings Menu in the Conductor ap... | |
| Aurender A10 help I suggest you connect your A10 to your Luxman amp and power down and restart your A10. Please check all settings on the Conductor App to ensure they are correct. please double check the cables from your A10 to the Luxman to confirm the right outp... | |
| How hot does the Ayre EX-8 2.0 Integrated Amplifier get? I scanned the Ayre EX-8 2.0 manual and discovered some interesting information. After 30 minutes of no activity, the amplifier will shut down its output stage. As soon as the amplifier receives an input signal, it will start up again. | |
| Aurender 5.21.958 update @jl1ny, Glad I was able to help and that it worked. Congratulations. | |
| Aurender 5.21.958 update Go to settings, Help and look for Remote Support Request. | |
| Aurender 5.21.958 update These problems are frustrating. I suggest you reboot your Router and modem. I also suggest you reboot your Aurender unit (power down and start). If you still cannot download the software update, please go to your Aurender Remote Request tab (in t... | |
| How hot does the Ayre EX-8 2.0 Integrated Amplifier get? Can the Ayre EX-8 2.0 Integrated Amplifier be left on 24/7 or should the ampliifer be placed in sleep mode when not in use? Ayre specifications say '60 watts in operating mode'. Thanks... | |
| Ayre ex-8 2.0 vs Bel Canto e1x Please see link below:https://www.stereophile.com/content/ayre-acoustics-ex-8-20-integrated-hub-da-integrated-amplifier | |
| Ayre ex-8 2.0 vs Bel Canto e1x Please read the Stereophile review of the EX-8 2.0 integrated amplifier. For example, “With its pure treble, clear and rich midrange, ample low end, and coherence, the Ayre is the finest solid state integrated I've had in my house. (The EAT E-Glo ... | |
| Aurender music servers: higher priced ones sonically better? @audioman58, I agree that DAC Streamer combinations, like DCS, Bricasti, etc. offer less steps and cables. The use of an Ethernet cable offers many advantages including its sound quality. For me, the biggest issue is the interface used to acce... |