georgehifi
Responses from georgehifi
| Curl or Pass And your response here makes you the perfect example. That’s right, I didn’t start this, I was being responsive to your bs abuse you tried to put on me and my product, even though it wasn’t mentioned originally by me. dougthebiker : I was steerin... | |
| Purifi Class D: Junk? Wow you need to look at the LM4562 a bit better than what your waffling on about. Texas Instruments designed it to work it’s optimum between 5-17v, and from what i can find it works with +-12v with the Purifi +-12v gives .00004thd +-17v gives .00... | |
| Curl or Pass The @georgehifi post is a perfect example. George loves the Tom Evans phono stages because he "Has models that have big gain so you only need a passive pre to go with them" and George sells Passive preamps. You are blind to what I said. It then s... | |
| Purifi Class D: Junk? Have you heard them in combination? I have, and I found them not a good match together. Are you saying it sound like **** like ricevs, and it’s a bad design bad sounding buffer? Or the impedance match is no good as a buffer? then any buffer will ... | |
| Does Anyone Think CD is Better Than Vinyl/Analog? Later recordings that were done using digital, CD wins out. Early recordings that were done analogue vinyl wins out, "until" I put a left to right bleed switch on the output of my CDP/dac that brings the channel separation back down to 30db at bes... | |
| Advice on a budget R2R DAC alaindexe Advice on a budget R2R DAC For great sounding budget priced "discrete" R2R dacs, go with Soekris range of R2R dacs. (Get one with volume control and go direct to poweramp.)http://www.soekris.dk/US distributerhttps://soekris.modhouseaudi... | |
| Purifi Class D: Junk? Wake up!! Did you come down with the last shower?It doesn’t sound ****, like your making out. And of course, leave out any buffer regardless of how good if one can with high output source, and you’ll reap those benefits of extra transparency/dynam... | |
| Purifi Class D: Junk? a stock Hypex buffer board There is nothing wrong with that buffer, Putzy's not an idiot to release a Hypex product that kind of bad sound **** | |
| McIntosh fuse changeout to make better sound In most cases the difference you’ll hear by replacing old burned fuses with standard new replacement fuses or cleaning contacts, would be the same as putting in a $150.00 super fuse, but without the cost....Jim Ya got that right https://youtu.... | |
| Purifi Class D: Junk? If the defeault Hypex board is really that compromised I’ve got those those Hypex buffer boards in my NC500 mono’s that have my own big linear supplies, there’s nothing wrong with the buffers (they don’t sound bad as some here would like you to b... | |
| Big amplifiers and heat dissipation in a small room Soundlab ESL speakers, 86 db. They seem to need more power than even large Martin Logans. Correct my Monoliths were 90db, easier than your 86db, both have nasty impedance and capacitive loads. Look at an amp that you can leave on with low Class... | |
| Curl or Pass PS: here is the US agent for themhttps://www.soundbysinger.com/high-end-audio/phono-stages-and-catridges | |
| Curl or Pass I would seriously look at Tom Evens range of phono stages, many hold him up as the Messiah of phono stages. Has models that have big gain so you only need a passive pre to go with them, and have switchable adjustable cartridge loading impedances.h... | |
| Living room system: class A or AB amps? robert1976 OP The low bias button is like a "stand by" button. No, not stand-by because that means the amp is not on, but a low biased high wattage Class-A/B amp that you can just leave as a warm up or use for non serious listening, eg: parties,... | |
| Living room system: class A or AB amps? robert1976 OP Robert I gave your answer to leaving it on all day with low heat and power consumption. Yet still having Class-A sound when listening.https://forum.audiogon.com/posts/2078150 |