dbld
Responses from dbld
| Krell FPB 600c 700cx 400cx Heatsink noises. My pinging stops once the amp is warmed up [300C]. It pings a couple of times upon warm-up and cool down though. It's no big deal to me...it kind of lets me know when it is good to go... | |
| Legacy Whisper owners - Steridian problem I thought I would post this update in case someone looks for help and finds this thread in the future.I too had a "buzz" from the mid-range drivers of my Whispers when I inputted via single-ended and outputted from the balanced outputs of the Whis... | |
| Neotech UPOCC Silver Interconnects vs AZen Where are you guys getting the Neotech stuff? I know VH Audio carries some bulk cable, but where else?Thanks- | |
| Xover parts quality,/sound difference? Are there any updates from anyone? | |
| Two Subs Vs. One Tim916 hits the nail on the head IMO.I have posted my experience in this thread:http://forum.audiogon.com/cgi-bin/fr.pl?cspkr&1163160495&read&3&4& | |
| Built a Flexi-type rack? Or use Acorn nuts on the top to hide the rod's end.Mijknarf - Nice rack BTW [stereo rack] | |
| Built a Flexi-type rack? Maril555 is right; the beauty of the threaded rod is the ability to level anything anywhere. Looking at Jamestown's pricing, it will cost you no more than $12 and no more than 1" of space on the bottom shelf to simply level that bottom shelf on it... | |
| Built a Flexi-type rack? Holy cow...Jamestown is incredible if those prices are legit. I just looked up 1" threaded rod, and a three foot length is about $38 and 1" brass nuts are only $4.64 each. I must be looking at it wrong... | |
| Xover parts quality,/sound difference? JD - be careful how much you play with the internal guts and wiring. I have been advised that even changing from a slide-on spade connector at a driver to straight soldering could change the impedance characteristics of that driver, and therefore ... | |
| Built a Flexi-type rack? John, It was a while ago when I made these, but you are right. The holes in the template are 1/8", and I just used an automatic punch to mark the cherry through the template. I was mistaken in my desription. | |
| Making Your Own 2D Diffusors Why not just try using some sort of PVC tubing all linked together to creat a panel? The round surface should effectively diffuse, and if you keep them as full tubes, they can perhaps act as resonators too.BTW, this is sort of a question rather th... | |
| Built a Flexi-type rack? John and others -I did one of these [two actually] and am about to start a much more elaborate [and expensive] rack project.I used solid 2" and 4" cherry shelves though [the 4" are just two 2" glued together] and simple 5/8 steel rod because this... | |
| Xover parts quality,/sound difference? To those with experience, is there any advantage to moving the crossover outside the speaker's cabinet? | |
| Velodyne DD-15 setup question Do you guys have any suggestions on setting up dual subs for 2-channel with the Velodyne system? I am using the SMS-1, not a DD sub. | |
| DIY Interconnects review Rhyno - Why do you say no to crimping? The crimping I am thinking of in the technique used with the WBT-0108 RCA. BTW - I am not making an argument, I am genuinely curious/interested. |