cleeds
Responses from cleeds
| Serious Problems with Qobuz brucknermahler "Matter of perspective" is not.It isn't? Do you mean we all have to think and feel the way that you do?... When I signed, all those recordings that are now missing were available, thus, this was one of the main reasons to join. ... | |
| Correct Way to Invert Phase mijostynWith my system I can invert phase on either channel or both at the same time all by remote control from the listening position. With both speakers in phase and switching them together not one of you would be able to tell inverted from... | |
| Serious Problems with Qobuz big_greg3,201 posts09-24-2020 8:35amThis "serious problem" may be a matter of perspective. Every once in a while, I’ll run into a song that isn’t available ... 99% of the time I can find and listen to anything I want on Qobuz. That 1% (or les... | |
| Serious Problems with Qobuz I don’t think what the OP describes is a "serious problem" at all. It sounds like a licensing issue. This frequently happens with CATV providers who get into a spat with a local station or cable channel about licensing fees, and channels are somet... | |
| All posts are listed in reverse chronology Have you tried using the "Sort" tool? It works for me. | |
| Magnepan's new LRS? kacomess I'm interested in reading Audiogon comments from technically sophisticated reviewers on that Audio Science thread. That might be difficult. I get the sense that not many people here take ASR seriously. (And I'm trying to be kind about... | |
| Adding An Impulse Noise Reduction Device cspiegs Where in line should I insert these devices (before or after the DBX 3BX DS)? I’m sure some people will cringe with this ... My thought is to put the noise reduction devices before the DBX unit.If you must, I would try it either way. It’s... | |
| I’m looking to upgrade my Magnum Dynalab MD106T??? mitchbAn upgraded antenna would be nice but is my MD ST-2 antenna not a decent antenna? I don’t think we would be allowed to install something large on our roof? We own our home but live in a town house complex. It would be nice for a better anten... | |
| IMHO (and friend's) opinion of acrylic platter mijostyn(VTA) does slightly change azimuth. Not as much as SRA and perhaps even overhang(depends on the original position of the arm) but as the arm elevates the stylus starts tilting towards the spindle.Yes, your turntable and arm may do that. I... | |
| IMHO (and friend's) opinion of acrylic platter mijostynIt does not matter what the platter is made of as long as it does not ring.You’ll find some users here whose experience would definitely contradict that.Any sonic changes are more likely due to changes in SRA, Azimuth and overhang.We’ve b... | |
| I’m looking to upgrade my Magnum Dynalab MD106T??? What part of your existing tuner’s performance do you think can be improved? If you’re seeking improvement, have you considered whether its antenna would benefit from an upgrade? | |
| IMHO (and friend's) opinion of acrylic platter vinylspin... since the album is sitting 3mm higher, perhaps it has something to do with the VTA setting ...If you made no adjustments afChanging to a thicker platter means you've also changed VTA, SRA, and overhang. So what you heard could be t... | |
| Turntable flashcider O... what is vta? ...There is a good brief overview here.The definitive work on this was by Risch & Maier, March ’81 Audio magazine here. This topic - and the related geometry of SRA, HTA (zenith), azimuth, and overhang - confuses ... | |
| Superb Bryston BDA-3.14 shaunmccullaghSo I might keep it, endure Manic Moose for the time being and buy an Aurender N100H at a later date which has some support for MQA and a business like GUI running on a well designed app.I'm in the process of trading my Aurender ... | |
| Which way should a cable's "Ground End" go? The shield that is connected at only one end should connect to the preamp, regardless of whether the other end goes to a source or amplifier. |