brf

Responses from brf

VPI Traveler
My dealer tells me that both the Classic and Traveler have a built in circuit that is similar to the standalone SDS but without about ability to vary the frequency nor does it step down the power once the table is up to speed. 
Distance from speakers - 2-way vs. 3-way vs. ?
Typically, you do not sit closer than the distance between the two speakers. 
VTA and SRA?
If your tonearm does not have VTA adjustment on the fly, using a USB computer magnifier scope and overlaying the stylus image over protractor software and adjust the SRA to 92 degrees is a good start. 
packing and shipping
Try contacting a professional packer and shipper who will take responsibility for damage during transit. 
Jeff Rowland Aeris or Bricasti M1?
Why not purchase the better sounding one???? 
VPI Classic 1 Cueing Problem
Sounds like your need a new setup technician. 
Enlightened Audio Designs DSP 7000 Series III
How about trying that auction site or placing an ad on Audiogon. 
Anyone with experience on Linn's new sub chassis?
You can also try the Linn forum for info, specs and opinions. 
Sophia Royal Princess 300b quality
What is Sophia's warranty period? If it is still under warrantee, you should get an exchange. 
making power from kt120 tubes
The answer is quite simple. To maximize the output and performance of any tube, you need to design a circuit to optimize the tube’s electrical requirements. The KT88 and the KT150 tubes have different electrical requirements. 
Best amp for 6 ohms speakers
If the speaker nominal impedance is 6 ohm and has a relative benign impedance swings, then almost any amp will work. What you need to be concerned with is how the impedance changes with a change in frequency. Some speakers that are rated 6 ohms wi... 
A strange phenomenon
Turn the system on and let it play for 2 hours and leave the room. How does the system sound when you return? If it sounds anemic at first listen, then it could be an equipment problem. If the system sounds great and then falls off within 2 hours,... 
Polling MagnePan Users - Using a SubWoofer?
Subs will not give you mid bass and/or low bass “thump” as they are designed to offer low frequency foundation. I would hire an acoustic engineer to review your room’s acoustic properties before investing one additional cent. I would hazard a gues... 
What are the purpose of "Tape" and "Rec" preamp ?
Usually, but not always, the outputs on preamps are grouped together (main 1, main 2, tape 1, tape 2, Rec, etc).I always thought that the tape output was always fixed with the rest of the outputs having a variable output. 
ARC Vsi60 with KT120 valves - issues
Try calling Synergy Audio and Visual, they are the Australian importers for ARC.