bobsdevices
Responses from bobsdevices
| Vacuuming after ultrasonic vinyl cleaning I vacuum one side, then flip it and vacuum the second side, then vacuum the cork mat, then vacuum the first side again. | |
| Which SUT to match Koetsu Rosewood Standard in my system? 1:20 is the best match for the Rosewood into the Audio Note. | |
| VPI upgrade? VPI has a walnut prime b-stock new on their website for $3375 | |
| VPI upgrade? You can get the Prime 21 with a gimballed arm installed at no extra cost. The bass response with the gimballed arm is amazing!. But if you want to change cartridges, you are better off with unipivot. You can get a separate arm with unipivot and... | |
| Shindo Masseto w Koetsu .3mv output The late Art Dudley was a Shindo fan, and if I remember correctly, he preferred the use of an outboard SUT vs. using the internal Lundahl transformers. His favorite was a Hommage T1. If you look at the end of this review, you can see his prefere... | |
| Remove Radio Station Background Noise There are some inexpensive cables on Amazon that will work well: Made with Canare L-4E6S, Star Quad, Audio Interconnect Cable and Amphenol ACPR Gold RCA Connectors – Directional Design - Custom Made by WORLDS BEST CABLES | |
| Step up transformer recommendation The AR Reference 3SE has Gain: Selectable 51 dB (Low) and 73 dB (High) at 1kHz BAL; 45 dB (Low) and 67 dB (High) at 1kHz SE. (MC and MM compatible). Input Impedance: 47k Ohms and 100 pF SE. Selectable loads: 1000, 500, 200, 100, 50 Ohms, and ... | |
| Remove Radio Station Background Noise Yes, you need EFI/RFI shielded cables. 2 twisted internal conductors covered by a shield (an aluminum foil covering then braided wire over the aluminum). Connect the shield to the - side of the RCA at the source end only and leave the other end d... | |
| Step up transformer recommendation A step up of between 1:15 and 1:20 would be the best match. | |
| Replacement for my Benz Micro Ruby Cardas carries a Myrtle Heart which is a Benz Ruby 3 in a Myrtlewood body | |
| Phono preamp advice Second on Hageman Trumpet MC | |
| Gain setting on Rega Aura with Apheta 3 Gain 1 is 69.5 dB, Gain 2 is 63.5 dB. The Apheta 3 has an output of .35mV. The best choice would be Gain 2. You should set the impedance load to 100. | |
| Need a sut for Hana ml Granted, there are some MM phono stages that are not the standard of approx 40 db and approximately 47k ohms. If it is not a standard MM input, then I stand corrected. However, my statement stands. The ML at 1:20 into a standard MM phono stage ... | |
| Hana Cartridge for MMF-7 ? Get the Hana SL and use the 1:10 SUT | |
| Need a sut for Hana ml I have used both the Hana SL and Hana ML as demo cartridges at audio shows, and have experimented with many different step up ratios. The Hana SL is perfect at 1:10. The Hana ML is perfect at 1:20. I highly recommend 1:20 with the ML into MM in... |