bdunne
Responses from bdunne
| Infocus X1 projector to Outlaw Audio 975 Still no luck. I am getting audio to work now, but no video. I adjusted the Outlaw to 1080i from 1080p. Even tried dumping down to 720 and 480p. Nothing. I also tried switching to Native. The source I'm using is a DVD player via HDMI connection. P... | |
| Infocus X1 projector to Outlaw Audio 975 Thanks for all of the responses. I went out and got a TV with HDMI inputs so I could access the Outlaw on screen display (apparently, this is the only way to do this is via HDMI). So, I adjusted the TV and Video sources from HDMI to component in t... | |
| Infocus X1 projector to Outlaw Audio 975 Thanks for all of the responses. I went out and got a TV with HDMI inputs so I could access the Outlaw on screen display (apparently, this is the only way to do this is via HDMI). So, I adjusted the TV and Video sources from HDMI to component in t... | |
| Integra DPS 6.7 DVD and SACD player direct to 5.1 I decided to go get a nearly new Outlaw Audio 975 surround processor. It was time to upgrade from my Marantz AV550 from before the year 2000. | |
| Integra DPS 6.7 DVD and SACD player direct to 5.1 Got it. Thanks. | |
| Surface noise Thanks again for all of the advice. The increase in VTF certainly provided the improvement I was looking for. I'm just going to back off of the 2g setting and see if I have the same luck at 1.7g. I am also replacing the stylus, as it is probably t... | |
| Surface noise Any suggestions on what resistor I should try as far as make/model and where I can get one?Thanks again,Brian | |
| Surface noise Problem solved !!!!! Thanks to everyone for the advice. All I did was bump the VTF to 2 grams from 1.5. No more "noise" in between tracks. Should I start to tweak it down a bit until I hear the noise again?Brian | |
| Surface noise Loading the cartridge? Now you've lost me. | |
| Surface noise Not really a whooshing sound. I've also changed the phono section tubes around with no difference (Rogue Audio 66 Magnum pre-amp). Your comment about the bearing noise sounds interesting. The tonearm does seem to deliver a decent amount of noise t... | |
| Surface noise Well, it's at least 4 or 5 years old. I wish I could take a stab at how many hours, but I'm afraid I wouldn't be close. Maybe 1,000 hours tops? I do have another older Grado to try and I will this weekend when I get home. Just to describe the soun... | |
| Surface noise All. Just between songs, not during the song. | |
| Surface noise I used that device that was included in the Hi-Fi news set up record. That was to double check what I had originally used, which was some download that I printed out several years ago. Wonder if my stylus is wearing down. Would that make for more ... | |
| Surface noise Yes, I clean with Record Doctor vacuum and fluid every time. Noise is there even on brand new 180 gram vinyl. I just checked set up with Hi Fi News set up record and everything seems fine except that track which they explain is pretty severe. On t... | |
| Placement of components in audio rack So, you run a long IC from your amp to your pre-amp. Is that OK? I don't have any IC's more than 1m, so I'd have to go out and buy some long stuff. |