2. home-theater
  3. 1406979867

Multichannel amp...

Long story short . I sold off my HT pre/pro and multichannel amp to separate the HT from the stereo. I'm now in a situation where we really need my stereo space "back", so I will once again have to integrate my stereo into my HT My pre-amp doesn't have HT pass thru so that's not an option.

What multichannel amp would match my Mark Levinson 331? I need to stay below $2k and used is definitely an option (even preferred).

For the time being, I will need to use my Onkyo TX-NR1010 with the amp-out but will add a dedicated pre/pro as funds becomes available (thinking something like Cary Cinema 12 or the like 2-ch quality is crucial)
128x128audiojan
audiojan's avatar
audiojan OP
390 posts
 
Ok, so it's obviously that I wasn't very clear. :-(

I'm planning to keep my ML331 for L/R, and add a multi channel amp for all other channels. It would need to be at least 5 channels though (my current set up is 7.2), but a 7-ch would be even better (I would use the current L/R Thiel MCS1's for wide channel duties)
vernneal's avatar
vernneal
438 posts
 
Emotiva 5 channels X 250 w
$1000
vernneal's avatar
vernneal
438 posts
 
And I have McIntosh amps but realize the value that Emotiva brings
mtrot
804 posts
 
Used Sherbourn 5/1500A if you can find one. Has FIVE separate toroidal transformers and 5x200 watts per channel. Weighs 80 pounds.

I actually have one that I would sell, but one channel is out, so I may need to look inside and see if I can figure out what it needs. I am actually using it for my two channel system in my bedroom. I believe it has mosfet output stages.
Ag insider logo xs@2x
dbphd
1,623 posts
 
If you can find a used Proceed HPA 3, that would be a good match. The Proceed HPA is a Levinson amp in an industrial case. If you can find one, it should be below $2K.

db
More to discover