2ohms, 4ohms, 8ohms, which to hookup too?


First off thanks for your help. I have a McIntosh MC300 and one pair of D700 and D500 Tannoy speakers. I would like to connect one of each to my right and left channel. The nominal impedance for each speaker is 6ohms.

The amp offers either a 2, 4 or 8 ohm connect. Which do I use and how to you caculate this total?
fishcricket
The formula is R1 X R2 over R1 + R2, so 36/12= 3 ohms. Try the 4 ohm or 2 ohm taps. Probably the 2 ohm will sound better.
If I understand your question correctly you are only connecting one pair of speakers. If so, either the 4 or 8 ohm outs could sound best depending on the actual impedence curve of the speakers. In my experience, with effecient speakers where the amount of power available is not a serious issue (you've got more than enuf for loud listening) I have preferred the 8 ohm taps of my amps. You should use your ears to determine which taps to use.

If you are talking about connecting both pairs of speakers (I can't imagine why you would) you would probably want to use the 4, or more likely the 2 ohm taps.
All good advice so far. I would add that while one might be theoretically correct, sonically you might prefer another.