WA-Quantum GmbH's Quantum Chips

Davidpritchard, your experience with instruments means that it is vibrations that are being effected not electrons. I had an experience in NM that suggests otherwise. I had put one of the ic Chips on and enjoyed the improvement. Later that evening while still enjoying the sound, I noticed that the chip on one ic was just hanging from one corner. As the sound was not affected, I assume this meant some non-vibration impact. But on speakers I have found that scotch tape is inadequate for attachment. The Chip needs to be directly attached. Finally, the new Power Chip just sitting on my HB power strip has a big effect. I have yet to directly attach the Chip.

Sgordon, I am going to try you outside use of the Power Chip. How do you protect yours from the weather?

Tbg, thanks for the response. I have found that 2 Cable chips on my Circuit breaker seem to add more dynamics, but I couldn't discern any change with just the Power chip.
Perhaps, I need to experiment further with its placement.

What a great hobby! One guy does back flips over
something that yields little or no improvement for someone else!

I started with one Power Chip on a Furutech strip,
and really liked it. Adding another Chip to the
breaker box, and another to the cable from the main power box leading into the house, dramatically improved the sound.

I have not found that the Power Chips are very sensitive to placement changes. I have not experienced any break in period. Being in Maryland, where we can get 30+ days of 90 degree weather, I have simply turned the Chip "upside down"
on the outside cable (western exposure), so that it is somewhat shielded from the elements, and faces the ground. I have not noticed any difference in the sound under different weather conditions, like rain.

Then, there is the question, "What to add, or subtract?"
If you are adding a tweak that is making an improvement, is it worthwhile to subtract or take away other things that have been in place, and have been working well? Conversely, if you are adding something and not really experiencing a positive result, does it make sense to remove the tweaks that are already in place?

At least with friends or family members at a holiday gathering, you might have an idea of who mixes well with others. (And who doesn't!) In the audio world, an open
mind, and open ears, are your best allies... agreed?

Following Tbg suggestion, I placed the power chip on the iEC just before my Audience Conditioner.
Bingo! Great powerful music.

Ozzy, hmm, serendipity at work. What I actually said was that I put a Power Chip on my power strip at the point that the power cord attaches. My system is out of service for a while as it is my grand daughters' bedroom and will be for seven days.

On a related matter, I finally found a spot on my power panel where the second Power Chip gives an improvement. Since my two dedicated lines were installed last, they are at the bottom of my panel. I scotch taped the Power Chip where the breakers are.