a great take on big$ cables


i was talkin to a friend about cables & wire's & no matter how hard i try to tell him its not needed he wont budge because he has heard that big buck wires are the way to go,i even showed him this web page & after reading it his response was this "if they didnt work then why would they sell them" after talking for hours i gave up & gave him a demo,he heard no difference & neither did i but he still believe's.

there isnt alot of info published on wires except by manufacturer's so i thought i'd post this so every body could enjoy it.

this is a link to roger russell's web site where he gives his thought's on wire's & cable's & reports on blind testing that was done,if your not familuar with him he was a audio engineer for many years & from some of the gear i own that he designed i'd say a damm fine engineer too.

if you are of the belief that big buck cable's are not worth using you may get a chuckle but if your a firm believer then you might be bummed out,anyway's here's the link if you care to read about wire's.

{http://www.roger-russell.com/wire/wire.htm}
128x128bigjoe
SERUS

good info on rfi's affects on power cord's & i couldnt agree more,i know its an old peice of gear but one of my favorite peice's is the cary cad5500 cd processor which remove's rfi interference from cd playback,that single peice of gear make's a huge difference.

just to clear the record i'm not trying to convert anybody into believing anything about cable's but there is a point to everything & also an oponion & information.

anytime somebody put's out info from the other side of the cable camp its taken as a direct attack on cable owners instead of taking it as it was meant,have i heard difference's in cable's, power cord's & wire's with my own ear's,yes i have but do i think they are a upgrade,for the most part i do not.

my personal belief is that cable's & power cord's do infact work because ive heard them work but i also believe that the benifits obtained from running exotic cabeling can be matched & even beat by going in another direction like by running a (quality) preamp with tone controls as jaybo suggested above or by getting away from gear that runs in low ohmage's,serus made a fine point in his post about how shitty rfi can make things sound but there is gear made to handle that problem that can be used instead of running exotic cable's.

i would rather fix & or control weak problem area's within my system with electronic's that have resale value as oposed to running exotic cabeling & loosing 50% of my investment as soon as i buy them.

mike.
i would rather fix & or control weak problem area's within my system with electronic's that have resale value as oposed to running exotic cabeling & loosing 50% of my investment as soon as i buy them.

I generally buy used, and don't lose any money should I decide to re-sell the cables. Then I'm free to focus on the sonics, not the price.
Bigjoe: I agree that it's best to correct the problem at the source, but most people just buy equipment to listen, not to fix it...
Coming from some background in power electronics (many years ago...), I appreciate these issues. Unfortunately I find that quite often audio engineers concentrate on the audio part of their gear and the power supply is sort of an afterthought. Real sad!
But it's "only" a power supply... Dah!!!
According to serus, "Our sound memory is pathetically short, like 5-10 seconds", while Evita says "my wife claims to hear significant differences between cables and cords".
Thanks for proving my point guys.