Oppo BD 105, stand alone DAC, or music streamer

I think the Oppo 105 analog is quite good, but you can decide for yourself by taking advantage of Oppo's 30-day return policy if it doesn't satisfy you. You'd be out only the cost of return shipping. Lots of folks who post at AVS argue for using a 95 or 105 direct to amps, eliminating a preamp or processor. The Oppos can do speaker configuration, bass management, and volume control, and their video processing is excellent.

We use analog from a 105 in our HT setup. Stereo goes through a Parasound Halo JC-2 analog preamp that it shares with a Sony XA5400ES and JC-3 phono stage. The amps are Proceed HPA monsters that drive KEF Reference 107/2 mains and 102 surrounds. The sound, whether music or HT, is superb. Video projected onto a 100" screen is also superb. We use the 105 as the processor for all surround, including that from a DirecTV HD-DVR. SW from the 105 goes to a pair of Velodyne SMS-1s that control a pair of HGS-15s.

db

I use an Oppo 105 as a DAC in my stereo and HT system. Stereo is mainly via computer audio through a MacBook Air running Aurdirvana Plus and 24/96 HDTrack files via USB into the Oppo. From the Oppo to a Krell HTS 7.1 (Analog, with the Krell just acting as a volume control). See my previous post on this subject. IMHO the results are spectacular, I am very happy with my system now and do not plan to change anything. Furthermore, regular CD via the Oppo is also excellent.

The 105 analog is quite good. Very good USB DAC as well. I'm one of those who run it directly into amps (W4S Mamps). The 105 appears to like amps with a higher input impedance based on my experiences. Really very happy with the combination. So simple as well.

I use the Oppo will not let you down. The break end is long and I think the XLR outs sound better than RCA

Update on this thread.

I haven't moved on a 2-channel DAC or universal disk player yet, but my Panasonic Blu-Ray quit working reliably, so after some consideration of Arcam or Oppo BDP players, I decided to just replace with another mass market player for the time being, a Samsung BD-H6500 Blu-Ray player. Turns out it was a terrific idea.

Sending raw bitstream data to my Arcam AVR400 via optical toslink, The Samsung sounds glorious. Timing is great, sound is detailed but not harsh. Bass is clear and pianos sound like a piano. Zero listening fatigue, even at high volumes. It is the best transport I have used to date, better than Sony ES, Cambridge Audio and Yamaha CD players, Panasonic Blu-Ray and Toshiba DVD. Granted, have not compared to dCS or other super high end transport, but this player only cost $149 new. And it does a good job with video and audio on Blu-Ray disks and streamed sources (Sound and Vision compared H6500’s HT performance favorably to Oppo 103D, although Samsung build is highly suspect). The Samsung has two built-in processors – don’t know if that helps with jitter or what, but results are really quite good.

Up to this point, while high res multichannel audio was terrific processed and amplified with the Arcam receiver, I was ready to write-off the DACs in the AVR400 for two channel redbook playback, and was shopping for an external DAC as the analog-in from my phono pre and old CDP were killing streamed data played through the internal DACs using mostly the Panasonic BDP as source. Now the two channel digital is every bit as enjoyable as (but different from) vinyl through the Arcam, and noticeably better than my old Yamaha CDP. While the Samsung may not last as long as an Oppo 103/105, neither will the current video specs. The fact that the Samsung does such a good as both a Blu-Ray and redbook transport is frosting on the cake. I may still get a stand alone DAC to support multiple digital sources, but in no rush now.