Building high-end 'tables cheap at Home Despot II


“For those who want the moon but can't afford it or those who can afford it but like to have fun and work with their hands, I'm willing to give out a recipe for a true high-end 'table which is easy to do, and fun to make as sky's the limit on design/creativity! The cost of materials, including 'table, is roughly $200 (depending, more or less), and add to that a Rega tonearm. The results are astonishing. I'll even tell/show you how to make chipboard look like marble and fool and impress all your friends. If there's interest I'll get on with this project, if not, I'll just continue making them in my basement. The next one I make will have a Corian top and have a zebra stripe pattern! Fun! Any takers?”

The Lead in “Da Thread” as posted by Johnnantais - 2-01-04

Let the saga continue. Sail on, oh ships of Lenco!
mario_b
Now THAT is skeletal Ronnie!! Reminds me of my first Lenco set-up, when I had no tools and no plans and the Lenco was sitting on stilts (that model, an L75, had usable metal stilts for some reason) with the Rega RB300. Even over a budget NAD 3020i/Boston A40 MKII system I heard details from my records I had never heard before, and with more musical intensity to boot. And this in comparison to both Maplenoll and Audiomeca turntables.

Great info for the Lenco archives Jim, keep'em coming.

Up here I'm still in the process of rebuilding my Garrard 301 grease-bearing, a big job!! But almost done, and hope to be hearing first notes very soon. Been playing with a variety of tonearms, have to say the Dynavector 507 MKII is perhaps the best I've heard (but the RS Labs may match it overall, but not for bass, have to listen some more), and it's not just audiophile niceties the Dyna excels in, it is also incredible at PRaT and gestalt, and an amazing match for the venerable Denon DL-103s. Too bad I can't afford one. Also playing with a Morch UP-4 unipivot, which is very light on its feet and ultra-detailed, reminds me very much of the Mayware, if better-behaved. And in spite of all these great tonearms, or perhaps because of it, my admiration for the Rega RB-300 just continues to grow as even in this august company (and including my experience with the SME V), the Rega holds its head up high. Likely due to its ultimate rigidity and simplicity (no rattly bits), even more rigid than the SME V (bolting arrangement simpler and stronger, no convenient doodads attached, etc.), the Rega has a PRESENCE, or palpability, none of the other tonearms so far have matched. In addition, in terms of detail, provided it has been re-wired, it is very close to the best, as it is in the bass and overall dynamics. The Dyna sets the standard here, but the Rega is not crushed. And, as if this weren't enough, the Rega is musical and easy to set-up!! I'll always have one anyway.

Which brings me to a phrase I always hear about various components, which ties in in turn to the history of audio. The old phrase "Poor Man's..." Now, I always heard that the Denon DL-103 is a Poor Man's Koetsu: it is no such thing. The Denon is superior in drive, PRAT and gestalt to any Koetsu; the Koetsu is superior in the purely audiophile areas of detail, frequency extension and imaging. This goes possibly for every single MC ever made, though the Dynavector 17D MKIII might stand a chance and the Ortofon SPUs. Since making music is the Prime Directive for any audio component, this places the venerable Denon DL-103s at the top of the heap, which is why they're venerable, in spite of being constantly damned with faint praise (many know better).

So how does it get the reputation of being a Poor Man's Koetsu? Because those who listen and write this choose to ignore the superior PRaT, drive and gestalt of the Denon and focus exclusively on detail and such-like (AND price), the great sickness /obsession of modern audio/audiophiles. Similarly, many years ago, when all were singing the praises of the superiority of the belt-drive over the idler-wheels they replaced, they chose to ignore the loss of dynamics and PRaT, of bass and excitement, and focused exclusively on other things, mainly a diminution of rumble (which it turns out was in many cases a myth and restricted to a few poorly set-up 'tables). Much more recently, the hyping of digital technologies also ignored the loss of musicality, and was leavened by a heady mix of misinformations, including the mythical increased dynamic range of digital media over analogue, which simple hearing (and various research papers which contradict the other research papers, which are based in unproven theories and the careful choosing of certain statistics and mathematics or other less "helpful" ones to achieve certain results on paper...Lies, Damned Lies, and Statistics) proves is not so. Which is to say that many "improvements" are bought at a price, that the price is utterly ignored, the pretense (La-La Land) being there isn't one, and that thus Progress and improvement is in many cases a myth. When the Denon's superiority (and many other pieces) in certain areas is accepted by the high-end designers and matched by them as a base-ground, THEN we will have Progress, not by pretending these superiorities, and the cost of losing them, doesn't exist. Those who take the time to actually listen to a properly set-up idler-wheel drive, rather than stick to their hoary old (and new) theories, learn this lesson.

Distilling all this, the Idler/Rega/Denon combo is THE greatest value in high-end audio today! Dependable and unfinicky too. Have fun all!!
I 3rd it. Jean, have you tried twl's tweak to the rega yet? Back to internet radio. Plasterer knealt down onto a 2" screw and it went fully into his kneecap! He had to use a screwdriver to get it out before going to hospital. Next plasterer 2 weeks away. then i decorate, plug 10mm monster mains cables (one for each component) directly from a Memera mains consumer unit into my hi fi with dedicated copper pipe earthing, and if the whole thing doesnt go up in flames i'll have one serious lenco/rega/denon lead system to play the 20 lp's ive bought since I moved into my present building site lookalike house 4 months ago. Hee
Hi David, Boy, the adventures just dont stop over there, do they? I haven't had my Rega up for a while now, I bought a new Rega RB-300 which I'll be re-wiring soon, and then I'll once again have a stab at Twl's tweak, as last time I couldn't find sufficiently heavy weights to implement it adequately. Now I am armed and ready!! Tom's invention should work as I know from experience, as increasing the mass for certain cartridges really does work to maximize them (i.e. the venerable Denons), and after my trials with the Dynavector 507 MKII I can see the lateral mass really does work: never heard the Denon DL-103"E" sound better, or nearly as good, except for the screaming-deal RS-A1 tonearm.

Due to too much Rock 'n Roll, I have bought more neighbour-friendly monitors, the vintage KEF Reference 103.2s (just can't shake that vintage sickness ;-)). I was hot for some classic KEF-driver speakers (like the legendary LS3/5a's, or the Spendor BC1s, or the Linn Kans, etc.) and tripped over these at a good price and discovered there was practically a religion devoted to them! They take power like nothing else, and between the Lenco and the 100-watt Pierre amp the sound is nothing short of incredible. These things really rock!! Very detailed, very neutral, and very musical, they seem to have no upper limit to SPLs, which kind of mitigates the reason I bought them in the first place :-). Oh well, I guess volume and dynamics is my destiny, thank you Dr. Lenco!!

At this end I've managed to get a very nice lacquered finish for my latest plinth, and I am working on making myself a Giant Lenco in high-gloss Nivea Cream Can blue (I do like colours!!). In the meantime, I've made myself a Giant Red Two-Armed Beast to tote around to play Crush the Belt-Drive, varnished for toughness, new pics under my "system". Oh Boy I'm having fun!! Next up, after the Garrard I'm currently working on, the Sony 2250 I've long threatened to try out, methinks another sleeper a la Lenco (though theoretically not as good being a DD, this one is especially musical - servo-control - we'll see/hear). Have fun with your own projects and enjoy that idler magic all!!
Hey Jean, Mr Red is pretty sweet. A nice job of craftsmanship. Is that a Morch I see?

Mike