2. analog
  3. 1096922170

$800 Cartridge Shootout and Upgrade Path


I am putting together an analog system, starting with the cartridge. I like a well-balanced sound with a slightly lush midrange and excellent extension at the frequency extremes. The cartridge should be a reasonably good tracker. Here are my choices:

1. Dynavector Karat 17D MkII
2. Shelter 501
3. Sumiko Black Bird
4. Grado Statement Master
5. Clearaudio Virtuoso Wood

Which one comes closest to my wish list? Which one would you choose?

Here are the upgrade cartridges to the above list, one of which would be purchased later:

1. Shelter 901
2. Benz Micro L2
3. Grado Statement Reference
4. Koetsu Black

Which one comes closest to my wish list? Which one would you choose?

Now, which turntable/tonearm combination (for new equipment up to $4,500) would you choose to handle a cartridge from the first group and the upgrade cartridge from the second group?

Any help you can provide is greatly welcomed. Thanks!
artar1
salectric
747 posts
 
Artar1, one of the neat things about the Galibier turntables is that it's so easy to add a second arm. I have both the 12" Moerch and a VPI JMW-10 arm mounted on mine right now. With the Teres I think you have to specify a different base in order to mount two arms.

Dave
artar1 OP
159 posts
 
Dave,

Which model do you have and how much is the cheapest one in the Galibier line? They look expensive! But boy are they really cool looking!
salectric
747 posts
 
Artar1, I have the Galibier Quattro ALU with the PVC platter. This is the "entry" model which presently sells for $3850. I will be trying out the Teflon/Aluminum composite platter shortly. The details of the lineup can be found at www.galibierdesign.com

Dave
visioncx
2 posts
 
Any of the denons in my opinion (dl103s was my favorite)would do a number on the above. In addition, probably one of the best cartridges I have heard is the B&O mmc 2. This would need the adapter to work in standard arm but a real gem. Many would snicker but the sound and engineering are magnificent!
twl
3,251 posts
 
Artar, in response to yesterday's questions, I don't know of any ways to know the horizontal effective mass of a tonearm, other than to get one and check it, or to use a published figure(if there is one available). Sometimes, tonearms have literature explaining their design ideas, and it would be mentioned. That is the case with the OL arms. Perhaps a call to the manufacturer may get you the info.

Now for the numbered questions:
1) The HiFi mod is not needed on the OL Encounter tonearm. It is already satisfactory in horizontal effective mass for low compliance cartridges. Also, the HiFi mod will not fit on it.

2)The HiFi mod does not affect the vertical effective mass of the tonearm, except to an extremely small extent, which would be related to the mass of the weights that is slightly outside the exact center of the tonearm bearing axle. Essentially, it makes no change to vertical mass.

3)The DL103R will work just fine on the Encounter, with no additional mods needed. The heavy bearing housing on the Encounter is designed to provide the increased horizontal effective mass.

4) The anti-skating force cannot be used to compensate for insufficient horizontal effective mass on any tonearm.
More to discover