Using a power strip in an old home that was build back in 1955


I'm not sure if this post is in the correct topic, but the title says it all. I live in a house that was built back in 1955 and this house has very few grounded outlets. I use power strips throughout the home and have never had a problem occur.

I plan to upgrade one power strip and my question is if I use a power strip like this one

https://www.amazon.com/SUPERDANNY-Protector-Outlets-Charging-Extension/dp/B08Z2ZKVXX/ref=sr_1_2_sspa?crid=3SBFJHLALO6QN&dib=eyJ2IjoiMSJ9.s0_HlP9WURLAXog0sGN2IYFWFyxz8mv_FlE-jBVldyFzMbcrgFRL4s7omCYnD5Tme9-N7eaM7TU6cSHLYvmCSKosQF2WDkWUCk3wcKYlkNkyj3aruYly_umT5WfWzdUCwVRgX2JMPDUc9Rs8xRlBnwjEybJuQfD7TVsKwe6XF_2GNQMXRQH35YxULNEytSE00WYIjIs23hTulfn45F3-aaYw2nOkns730GHg4Pb2vHw.1VcY2JcKKBP7V9hL1YgK-OAGfbzc_GHUvAOvOyqbJbE&dib_tag=se&keywords=power+strip+24+outlets%5C&qid=1726891536&sprefix=power+strip+24+outlets+%2Caps%2C293&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

Would I have a wiring fault as the outlet is not grounded?

This power strip doesn't have a yellow light built in.

https://www.amazon.com/TROND-Protector-Rotating-Extension-Essentials/dp/B0D1K55GPC/ref=sr_1_9?crid=3SBFJHLALO6QN&dib=eyJ2IjoiMSJ9.s0_HlP9WURLAXog0sGN2IYFWFyxz8mv_FlE-jBVldyFzMbcrgFRL4s7omCYnD5Tme9-N7eaM7TU6cSHLYvmCSKosQF2WDkWUCk3wcKYlkNkyj3aruYly_umT5WfWzdUCwVRgX2JMPDUc9Rs8xRlBnwjEybJuQfD7TVsKwe6XF_2GNQMXRQH35YxULNEytSE00WYIjIs23hTulfn45F3-aaYw2nOkns730GHg4Pb2vHw.1VcY2JcKKBP7V9hL1YgK-OAGfbzc_GHUvAOvOyqbJbE&dib_tag=se&keywords=power+strip+24+outlets%5C&qid=1726891536&sprefix=power+strip+24+outlets+%2Caps%2C293&sr=8-9

I'm not an expert in the field so that is why I'm asking.

128x128gamekid

You will need an adapter plug to use that Amazon strip with your two-prong AC outlets.

To provide some additional information.

I've been using power strips for years. Most of the outlets in my home are the 3 prong type, but are not grounded. My room has a 2 prong ungrounded outlet. I added a 2 to 3 prong adapter and added a power strip. No issues.

In the living room, where my tv is, the outlet is a 3 prong ungrounded outlet. I plan to upgrade my power strip from a 12 to a 22 or 24 outlet power strip. I'd plug in gaming consoles along with upscalers.

What I don't want to have happen is to plug in a 22 outlet power strip and have a wiring fault occur so that the power strip doesn't function. Although it doesn't seem like a problem would occur.

I'm not an electrician, but this sounds like living dangerously to me. I think that it's illegal in my jurisdiction to have a three-hole receptacle which isn't grounded. In any case, I would never do it because that ground pin can save your life.

Also, most surge suppressors route excess energy into that ground pin. IF that's connected to nothing, then protection is nil. The first thing I did when I moved into a 1950's house was upgrade all the important circuits to 3-conductor, along with a 200A service.

Just my $.02 - but I strongly urge you to consult an electrician.

I may be living dangerously, but nothing bad has ever happened. I've never had a fire start or anything. Maybe I'm just really lucky.

Your circuit, which likely consists of several to many wall outlets, is likely on a 15amp breaker, if you have breakers.   This can be easily overpowered with that number of outlets on one strip.  Add up the amps of each thing you intend to plug in.

22 is too many things and noisy to boot.