2. digital
  3. 1248442291

At a Levinson crossroads .... need advice.

I need a little advice folks ...

About two years ago I purchased a Mark Levinson No.360S DAC and was very pleased with how it fit into my system. To this I added a No. 37 transport to match the 360S and was initially happy with that as well.

Here is a breakdown of what I put together :

Modwright SWL 9.0 Linestage
Mark Levinson No. 23.5 Amplifier (Summer)
McIntosh MC275 Amplifier (Winter)
Mark Levinson No.360S DAC
Mark Levinson No.37 transport
Proac Response D Two
Velodyne DD-10

Cardas Crosslink ICs
Acoustic Zen ICs
Signal Cable Silver ICs
Cobalt Cable 10 GA copper speaker cable

Like I stated before; I am very, very pleased with the sound. I have the system in a medium sized bedroom converted into a listening space. Everything was wonderful for about 3-4 months and then the transport started to skip. After a month or two of occasional skipping it started skipping all the time. I took it in locally to a trusted tech and he did the best he could but it didn’t help. I purchased the No. 37 from a seller on Audiogon but I felt enough time had gone by that it wasn’t fair to ask for assistance. I had only put 15-20 hours on the unit but I feel you have a fairly short time after the purchase of an item to report a problem. Six months after a purchase is just too far down the road for me. I have my PC plugged into the 360S as well and listen to FLAC files more than CDs but I do like to spin a CD every now and then. I paid close to $2K for the 37 and not it sits on the rack covered and silent.

My question is "What to do?" I found out the only place to get the unit repaired is Pyramid audio in Texas and I have read mixed reviews on their service. I called and talked to a technician and repairs could easily run over $1000. I have emailed a few members selling units and asked about the No. 37's reliability. Most people I talk to were pretty happy with the units. I was wondering who else out there has gone though this experience and how did it work out? Anyone out there happy with their No. 37 repairs from Pyramid? Any estimate on what this will do to me financially? I am wondering if I have a defective unit and should sell it as is for a fair price and move on or maybe it just needs a new laser assembly and it will be good as new. I'm not all that familiar with this unit but it's a big turn off when Harmon bows out of repairing vintage ML gear and will only supply parts to one or two repair shops in the world. Certainly there are gifted techs out there that could do the work if they could only get the parts. I certainly don’t want to play "tennis" with this unit shipping it back and forth to Texas if the repairs are not complete. If I put another $1000 into this thing and have more problems I'm going to be less than happy.

As always you input is appreciated.

Mike
128x128horseface
Post removed 
davehrab's avatar
davehrab
380 posts
 
a toaster that looks like a Mac amp ... They should give one away with evey one of those fly Mac turntables as a premium.

When you buy a toaster now ... most places will give you a Bank free of charge
jeffb28451
129 posts
 
My experience with Levinson was dark, dank and smelly. New $8k DAC, orphaned, promised upgrades never materialized, $5k amp, defective on off switch and premature cap death, found out it was my problem (even though they knew about the issues) $5k pre-amp, unserviceable for the costs involved, after a 5 year life.

Their ex-head tech, before Harmon took over said I should buy a nice new shotgun for my other hobby before spendig money on any new ML or repair costs. He knew what was coming, evidently.

I've been in high end about 30 years now and have never, ever had a company, OF ANY SORT, treat repairs or customer service so arrogantly and the repair costs are just nothing short of unconscionable, IF anybody gives enough of a damn to even try. I've heard horror stories about repair ATTEMPTS that cost a fortune and were a total waste.

I don't know about the repair places mentioned, but I've heard about the costs and quite spotty repairs. I'm sure that's not all true, but I voted with my pocketbook, cut my loses, and sold it for the disappointment that it had become.
french_fries
815 posts
 
i had a #37 that made a scraping sound and also did some skipping (after about 4 years from brand new). there is a kit that costs under $50 that replaces the lift-mechanism that puts the cd in the "play" position. you have to open the unit (remove the BOTTOM panel) and then replace what you see (exactly). it does not take special tools but you do have to have confidence that you can do it. there are no electrical connections or other issues however in doing this service. otherwise, yes, if you involve an authorized repair service,
you will be spending alot of money- get an estimate 1st...
all this is disappointing, but other manufacter's cdp's/transports also have had mechanical issues as well, ESPECIALLY the more expensive they are, the more aggrevating. when levinson was doing "better" years ago repairs were still expensive but the units were very thoroughly bench tested-
by the same people that put them together in the 1st place.
someday perhaps the company will recover from its more recent spotty reputation.
i also had the 360S and it did an awsome job, esp. on hdcd (ref.recordings) with the #37. the sound was just shy of the "reference" 31.5/30.6 at a fraction of the price; in fact levinson eventually stopped making the reference-level gear as a result. but again, this solid reputation for leading the digital front-end technology has suffered. and now some say the new levinson SACD player has some reliability issues. for $15k it "should" outperform meridian/esoteric etc. players and play for thousands of hours without any hiccups. AND, if it doesn't, you send it back and get a NEW unit, with levinson paying shipping both ways. then you get customers BRAGGING about the service, which results in a whole bunch of NEW sales of the cdp. which is the "american way", right? btw, i am trying to be serious here. i mean, just how many leading brands are going to be dissed into the ground and eventually disappear from the market, only to leave you with alot of strange looking and expensive foreign brands (like nagra) or a lot of controversial "conversion D/A technologies". i always looked up to a few industry leaders and put up with their occasional short-comings, rather than wondering if the oversampling/upsampling/resampling "gizmo's" inside of the competition were better or just out there to impress the digital-tech lovers.
horseface's avatar
horseface OP
222 posts
 
Thanks for all the responses.

At this point I think I will compare my Levinson No.37 to having a crazy, hot girlfriend. The transport is really attractive to me. In fact when placed on top of the 360S ... downright sexy BUT it's unpredictable and at least in this case, unreliable. I am on the verge of selling off all my Levinson gear (Yes, there is more) except for the 23.5 and 360S. I have a local tech (very good) who will completely recap the 23.5 for me. He will use upgraded caps where it makes sense and I should be able to baby the 23.5 for at least another 10 years. The 360S I will run until it dies and then bury it in the back yard.
I should be able to get $500-600 for the transport as-is and someone who is more adventurous than I can have a rebuilt unit from Pyramid for $1200-1500. To be honest ... I might just get the Oppo Blu Ray and continue using my computer as my main source. I'll save my pennies and look at a Modwright KWA-150 or a Pass Labs 250.5 to replace the 23.5. I'll keep the 23.5 as a backup. It was the first "really good" piece of equipment I ever bought and just like the Nikon F3 I have sitting next to my digital SLR - I cant part with it for sentimental reasons ... well, that and I am getting to old to lift it.

I went down to the crossroads, fell down on my knees.
I went down to the crossroads, fell down on my knees.
Asked Harmon Specialty Group for mercy, now I'm broke.
.
.
.
More to discover