Alright. I will start with a different DAC and see what occurs...
How to proceed?
Removing my Aqua La Voce dac from my system has eliminated fatigue and reduced but not fully eliminated sibilance. Running my Jay’s CDT2MKIII into my Hegel H390’s onboard dac is definitely a more relaxed presentation but tonally leaner than I prefer. Some have suggested I swap out the Hegel, but first I’d like to try another dac.
What I’m unclear about is how to go about choosing another dac that will not duplicate the same drawbacks I’ve experienced with the Aqua. Are there details in the design or specs that can guide me in this regard? I'm unsure how to proceed.
- ...
- 86 posts total
If all of your components and cables were chosen for their reputation of being highly detailed the presentation can lean too far in that direction. The leading edges of instruments and vocals are a little over emphasized and sibilance happens. A warmer cable in the mix might eliminate that and restore the balance. WireWorld and Cardas come to mind if you decide to try.The silver coated cable you're using might too much used throughout. |
Resolution has never been a top priority. I don’t mean to be contentious but did you not read through the thread?
My IC and power cables are a mix of copper and silver-plated copper, chosen after finding all copper too dark and all silver too bright. My digital cable was described as having "a very liquid warmth that’s more gold than silver" in an Audio Bacon shoot-out among eleven contenders. I’m not opposed to trying a different cable but I’d be surprised if swapping out a cable would have the same impact that results from removing the Aqua DAC from the system. The same coax BNC is used in both scenarios. When it connects transport to integrated’s internal DAC, fatigue disappears and sibilance is noticeably less exaggerated.
|
Hi @stuartk As you may recall, we have the same integrated amp. Having said that, when my very expensive Sony professional CDT died a few years ago, I ended up replacing it with a Audiolab 6000CDT. An Audioquest Carbon digital to a Denafrips Pontus ll and XLR to the H390. And it sounds beautiful. I’m not familiar with your DAC, but were you running it with oversampling? Also, is your room treated with sound absorption? |
- 86 posts total