Garrard 301 motor and rumble

Mijo, I don’t argue with what you say, but it could be that certain drive systems are more capable than others in making incremental corrections in speed to maintain a more constant 33.333 rpm. Because of less compliance in the drive system compared to a BD or even a DD. That capacity for rapid short term acceleration might be heard as forceful performance. After all, there has to be something beneficial about ID. Which might be why putting a 20 or 40 lb platter on a 301 is heard to be counter productive by listeners who key on that sense of drive.

You won't anger me mijostyn. Seriously. Have at it and if I respond at all, it will be polite and measured. I promise. 

I don't agree with much of what you have to say but when there are legions of respected audio writers who disagree with you, I don't have to defend the praises of a good idler drive. 

Ralph Karston loves his Technics 1200's. There are legions of VPI fans. You love your Sota. And the divergent tastes and opinions go on and on. It is interesting that we accept that our taste in loudspeakers is different than one another's, and yet we somehow expect some degree of consensus as to turntable and arm combinations and turntable design philosophies. 

I have said it before and I say it again-I know that there are many turntables that are technically superior to my two hot-rodded idler's BUT I also know that my TD124 and Garrard 301 will be reproducing music just fine when my great great grandchildren are looking for a turntable. These decks were built to LAST. 

I would definitely replace the belt. You must order the belt from SOTA. Do not use generic replacements.

You might also have your serial number in hand and request a list of upgrades available for your unit. There have been many improvements over the years. For sure you should consider a new magnetic bearing and platter. 

If records have trouble sealing you will need to send your platter back and have a new mat put on. Records that are warped or dished and won't seal sometimes can be made to seal by starting up the table with the two finger nails pushing the lip of the record down at 180 degrees for three revolutions. records that are dished will seal on one side but not the other. 

If the pump makes enough noise that you can hear it from a distance of 10 feet it will need to be replaced with a new unit. The new ones are much quieter. 
 

@mijostyn  No such worries or anything even remotely similar apply to either of my idler turntables. If there is such a thing as a vacuum hold down system that does not fail, sooner or later, color me surprised. 

If a Vacuum Platter Mat is desired for the 301, the AT 665 or 666 will both be able to offer Vacuum Clamping to the LP.

I have the AT 666 and have heard a pristine functioning model prior to making my purchase.

The AT 666 is a Metal Mat and is the one out of Three owned Metal Mats that creates the leanest of the Mats in their presentation. If this sonic is transferred to being perceived on a 301, the tightening of the Bass might be a interesting alternative presentation.  

I also know a individual with the 665 version and they are quite impressed with its Vacuum capability, I'm not sure how they view it as a sonic influence.    

@fsonicsmith 

No, you just have to replace a noisy idler wheel every couple of months or so. 

The actually pump Sota uses is child's play to replace and readily available. If you can come up with a better way to perfectly flatten a record and mate it to a mat of the same mechanical impedance color me surprised. 

It appears you are an antique collector and not interested in the highest levels of performance. I have an old Nagra Tape Machine on display, beautiful thing. I never use it.