They are great D class amps with a Tube stage
PSAUDIO has a 30 day trial period that is no charge
They will also give you $$$ towards old equipment towards purchase
Trying out equipment via PSAUDIO is a no brainer
PS audio m1200
Hi,
I have an ARC Ref 6 preamp with B&W 803 D3 speakers. The M1200’s have a lot of power. I am going to look for a way to demo them. The specs list 600W into 8ohm, 1200 into 4, and stable transients at 2ohms.
I believe the speaker impedance curve has a 3ohm dip. Does anyone have experience to know if these amps are stable at 3ohms with enough power?
Thanks
- ...
- 22 posts total
@zpatenaude37 The Bel Canto Ref 1000m also use ICEpower modules, though they use the older 1000ASP boards. I would go for the PS Audio M1200 for the tube input stage and power supply mods. The Ref 1000m is basically just the ICEpower board hooked up in a chassis, nothing more really. That said, it would be great to be able to demo them before you make any moves. It should probably work, but in my experience ICEpower boards suffer most in the upper midrange and highs (being thinner and fatiguing). A speaker that is low impedance in the midrange like yours can make it sound even thinner, but that may be alleviated by the mods PS Audio has done (tube input stage and power supply upgrades). Asking them may be a good way to move forward. |
I’ll have to think about your dilemma. But you have an outstanding preamp and speakers. Putting a much lower quality amp like PS or some others recommended here is not going to result in a great sounding system. If I were you I would be looking at Pass, Audio Research and VAC or CJ for amps.
While B&W are “hot” in the treble… Audio Research is definitely not.
My systems are under my ID. |
- 22 posts total