How do I switch from Wi-Fi to Ethernet cables?
My Bluesound Node currently receives Wi-Fi, but I'd like to switch to a direct link. I assume that would be with an ethernet cable from the modem to the Bluesound - with possibly a better switch between the two.
The problem is that my modem is in the basement and the Bluesound is on a different floor. There is not a clear path for running cable.
Is there a piece of equipment or technology that I could help in this situation?
There is a thing called power line wi-fi adapters, TP-LINK is pioneer and better. Two is needed for one connection, comes in various bandwidth options sizes. Get one pair which more/suitable bandwidth. Moreover performance is defendant on tightness of connecting parts and lesser clutters the better the bandwidth. This method is next best than drawing new Ethernet line, Try in Pre-loved market as it is cheaper and doesn't age.
|
I tried hooking up a Matrix Element M2 tonight in my office to Cat6 a few feet from a 10Gbps switch and there was significant pops and crackles coming thru. Disconnected the cable and used wifi - dead silent. Well at least I actually tried it. Common knowledge ethernet can introduce electrical noise especially in locations with computers and other electrical gear. Google it sometime. Enjoy the popcorn.But I'll have a scotch 🥃
|
If you have cable throughout your house you could run an MOCA ethernet to coax adapter. Had a similar situation of modem on one floor and streamer on another. I had coax running through home so installed MOCA ethernet adapters on each end of coax. Works well. https://worldwidesupply.net/blog/moca-adapters-beginners-guide/ |
The OP @imaninatural mentioned a desire to move from wifi to wired. It was not stated what his/her reasons are. Is it in the hope of better audio quality? Or is it because the wifi has hiccups? Hiccups can probably be mended with a wifi extender or a wifi-mesh setup. I would not put my hopes up for improved sound quality if there already is enough bandwidth for lossless streams. They will reach your Bluesound Node without error, otherwise your Bluesound would not be able to update it's firmware without error. |
I use the TP Link Power Line adapters and they work great . From the TP Link AC adapter I run ethernet cable to a TP Link switch. The switch has two SFP fiber optic ports. I use a fiber optic media converter for my Vault and another one to my Aurender N200. Works great, quiet, you would never know i am running an ethernet over AC adapter. |
