2. misc-audio
  3. 181690-170951

Getting computer to recognize A/D Source

Not sure where this belongs, but I am trying to convert my vinyl to digital files.

My signal path is: Turntable -> Phono Preamp -> A/D Converter -> Yellowtec PUC2 Lite -> Computer via USB cable

I spent the money on the PUC2 because it has an AES in and out on the same box. When I want to play music through my DAC, the AES out works without fail.

When I try to do AES in, my computer has recognized it as a source for two short stints, then fails no matter what settings get changed, system-initiated troubleshooting, or unplugging and replugging the USB cable does at either end.

Any help would be appreciated. Thanks.

ricksgiving
erik_squires
15,928 posts
 

Check the USB connection, make sure it's appropriate.  For instance, your device may require USB 2 or 3 based on the ADC settings.

Also, try bypassing any external hubs.

erik_squires
15,928 posts
 

If Windows sees it as a recording device, you may need to set the sampling rate and mode (mono or stereo)  correclty in Windows.  Windows audio is a hot mess always.

 

ricksgiving OP
19 posts
 

My A/D and D/A both do not have a USB connection, only AES and other digital sources. I will look into the other settings. Thanks

fuzztone's avatar
fuzztone
5,510 posts
 

??

You simply need an ADC that outputs to USB if you want to export to a PC. They are much cheaper and available compared to an AES/EBU to USB converter.

A PUC lite accomplishes 0 for that task.

http://digitalaudiodirections.blogspot.com/2016/03/yellowtec-puc-2-lite-usbaes-bridge.html?m=1#:~:text=The%20Puc%202%20Lite%20is%20a%20pure%20digital%20input%20converter,USB%20cable%20that%20is%20supplied.

ricksgiving OP
19 posts
 

You figured it out erik. I found the setting in Windows that changed the bit and sampling rate to match my A/D and it worked right away. Thank you very much.

More to discover