Musetec (LKS) MH-DA005 DAC


Some history: I was the OP on a four year old thread about the Chinese LKS MH-DA004 DAC. It achieved an underground buzz. The open architecture of its predecessor MH-DA003 made it the object of a lot of user mods, usually to its analog section, rolling op amps or replacing with discrete. The MH-DA004 with its new ESS chips and JFET analog section was called better then the modified older units. It has two ES9038pro DAC chips deliberately run warm, massive power supply, powered Amanero USB board, JFET section, 3 Crystek femtosecond clocks, Mundorf caps, Cardas connectors, etc., for about $1500. For this vinyl guy any reservation about ESS chips was resolved by the LKS implimentaion, but their revelation of detail was preserved, something that a listener to classic music especially appreciated. I made a list of DACs (many far more expensive) it was compared favorably to in forums. Modifications continued, now to clocks and caps. Components built to a price can be improved by costlier parts and the modifiers wrote glowingly of the SQ they achieved.

Meanwhile, during the 4 years after release of the MH-DA004, LKS (now Musetec) worked on the new MH-DA005 design, also with a pair of ES9038pro chips. This time he used more of the best components available. One torroidal transformer has silver plated copper. Also banks of super capacitors that act like batteries, solid silver hookup wire, 4 femtoclocks each costing multiples of the Crysteks, a revised Amanero board, more of the best European caps and a new partitioned case. I can't say cost NO object, but costs well beyond. A higher price, of course. Details at http://www.mu-sound.com/DA005-detail.html

The question, surely, is: How does it sound? I'm only going to answer indirectly for the moment. I thought that the MH-DA004 was to be my last DAC, or at least for a very long time. I was persuaded to part with my $$ by research, and by satisfaction with the MH-DA004. Frankly, I have been overwhelmed by the improvement; just didn't think it was possible. Fluidity, clarity, bass extension. A post to another board summed it up better than I can after listening to piano trios: "I have probably attended hundreds of classical concerts (both orchestral and chamber) in my life. I know what live sounds like in a good and bad seat and in a good and mediocre hall. All I can say is HOLY CRAP, this sounds like the real thing from a good seat in a good hall. Not an approximation of reality, but reality."

melm

@sirnui Good luck on your journey, it makes sense to start with power supply and power cables.

I would suggest you also experiment with Audioquest PCs and the Niagara Power Conditioners.

I am embarking on that journey now. Start with your power amp.

@sirnui I went through a period of auditioning power conditioners a few years ago, Shunyata, PSAudio, Audience, some others forgetting at this point. I settled on transformer based solution, self modified BPT 3.5 Signature.

 

Power amps should go direct into wall, every single PC I tried diminished transients to some degree. I like your idea of the Giandel inverter, have been following the battery thread here. I did try battery pack power at one time for Auralic Vega dac, interesting results, went back to BPT for power. Higher quality inverter should help, I'll get around to it some day. Quality batteries would also be important if I end up trying it.

 

I also went through years of auditioning cabling of all types some years ago, power cables are easily most important.

 

Footers for the 005 also have fairly large impact on SQ, as they are for all components. I've gone no footer route with 005, no footer is best footer, more natural SQ vs stock, various Aurios, Finite Elemente, any soft footer, BDR cones, Stillpoints Ultra SS with and without UltraBases. Really amazing sound from my system at this point, 005 not going away any time soon.

@lordmelton @sns 

since I love you, since I've done 6 months of testing on the MUSETEC, since I'm lucky enough to have a premium hifi dealer friend, I want to offer you the best advice regarding power supply.

with an expense close to 1000$ it is possible to buy one of the best mains conditioners on the market (German product for hospital use) which you can also find on Amazon.

the product in question is called XANTO and is available for different potencies.

in my system I use a XANTO X2000

@americanspirit Looks like contender, but what I'm really after is more diy solution. I want all components and parts to be top grade, audiophile grade, batteries alone over $500 for what I've been looking at. We have audiophile grade off the shelf already with this, http://s1000   Problem is I'm not spending $15k and up!