Node failing, surges?

There is no power light. And pretty sure there is no way for user to reset the newest Node. Still waiting to hear back from Bluesound. First came back as problem solved, probably cause they sent a new one 4 weeks ago. 
 
If I get another will probably just use my mesh wifi and hopefully the direct Ethernet was the culprit. The newest google mesh unit that I have have no Ethernet out. But are about twice as fast as the older ones. 

I asked because that’s what happened to mine and lot of others on the older models, (not sure if they solved the problem on the newer model, hence, why I asked). I was able to fix mine myself, (actually pretty easy, if you’re handy with a soldering iron).

"The Dreaded Red Light Of Death":

Gracias. I wish it would at least power up. Looks like they will send another but no feedback on what may be the cause. I suspect some surge as doubt their power supplies are that bad. When I get the new one I'll stick with wifi unfortunately and hope for the best. I really have no clue, if it is a surge, if it is coming via power or ethernet. 

Hey. So sometimes switching power supplies fail due to low incoming voltages. It’s an issue which has been mostly dealt with but may still happen. The issue is that a switching transistor must be on or off. That’s how it gets efficient and stays cool. If a long term low voltage situation arises the transisor may go into a linear state, not fully on or off.. and that’s the least efficient and most heat creating part of the curve.

Advanced power supplies like Furman and Panamax with low power disconnects can prevent this, but I’d be surprised if this happened. Most power supply makers are aware and have ways to prevent this issue from happening.

From what I've read, these situations often happen when power is being restored, or the power flickers, without actually surging.

Probably a dumb thought, but have your tried plugging the Node into the wall outlet instead of the power condition?  Maybe the condition itself has a problem.