Everybody knows WD-40 attracts dirt. Use a teflon base lubricant instead!
What is your record cleaning regimen?
I am just getting into vinyl, and inheriting records, buying some used and most recently a few new.
I have only a few hundred records so far, but I have invested in cleaning supplies.
Specifically, I have various pre-set solutions (groovewasher, Tergikleen, distilled water, simple green), a goat hair brush, micro fiber cloths, a baby scalp scrubber and a DeGritter machine (extravagant at this stage, but a huge time saver).
Here is my regime at this point. For any new record, whether inherited or bought, used or new, I wipe it with a dry cloth or the goat hair brush to remove any initial dust. Then I cover the label and spray some solution on it and use the baby scrubber to distribute the liquid around to cover the surface. Then I use a padded microfiber to wipe it off. Then I Degrit.
Btw, I tried WD-40 once, which does work to remove crackles, but subsequent cleanings cause those crackles to come right back, which to me indicates that WD-40 is leaving a residue on the record which I suspect is not helpful in the long run.
Likewise, the goat hair brush is so far disappointing as it seems to shed hair on the record which somewhat defeats its purpose.
Interested in other people's processes and I have a question. I have some older records that have persistent crackles. Will cleaning ultimately make those go away or do I just need to get over it?
I have ordered a record label protector that will allow me to wash in the sink with soap and water in the hopes of getting the ultimate clean.
Any thoughts from the analog folks here would be great.
- ...
- 59 posts total
Here's my simple, budget-friendly process: 1- Place the record on the turntable and place the record clamp on it 2 - Take a piece of dark corduroy (a 5" x 12" piece that is rolled up) and spray a couple times with spray bottle of distilled water, not enough to make it wet, but just damp enough to collect dust 3 - Spin the record at least one rotation with the slightly damp corduroy, not pressing too hard, but just enough; if the record is really dirty, you may need another spray or two and to press harder 4 - Reroll the corduroy to a dry spot and spin the record again (pressing very lightly) to dry the record This is a quick, easy process I use every single time before I play a record, and I couldn't be more happy with the results. |
@cleeds , The KL was my second choice. I went with the Clearaudio Double Matrix Pro Sonic. I prefer vacuum drying and in spite of the KL's filter recirculation system I prefer the cleaner use fresh fluid for each pass and discard the old. The KL with it's hoses and fluid tank is also a much more complicated set up. Most people do not know this because, for some reason, Clearaudio does not mention this in it's markerting. It takes three passes, each with fresh fluid during a cleaning cycle vacuuming the fluid off with each pass. It is not ultrasonic. It vibrates it's microfiber brushes at something like 1000 Hz scrubbing the groove. I've adjusted the proprietary formula for my cleaning fluid to leave as little on the record as I can. I'm going to take pictures of the stylus at intervals to see if anything accumulates. After 4 weeks none of the treated records will collect static and the stylus looks clean to the naked eye after 20 or so sides. When I get The Seta L Plus I will record before and after drops of the same record to see if there is any difference in background noise. |
- 59 posts total