Miraga M1 vs Totem Mani-2

I had Mani 2's for a number of years.  Not familiar with the Mirage,  No way is 5o wats enough for the Mani's unless you plan to high pass them with a sub.  And then what's the point of getting Mani's?

Mani 2's with the right amp, and in the right room is a better speaker.  Mani 2's always had Dynaudio drivers in them.  This was the reason they were discontinued, because Totem was having troubles sourcing the drivers.  At least that's what I was told by Totem a couple years ago.  

Thanks for all Your opinions

question is if 50 watt in class A from SET ( but 50 kg of weight with beefy transformer ) will be enough power for Mani-2 in room about 20 m2 .?

Mani 2's with the right amp, and in the right room is a better speaker. 

The same can be said about the M-1. My first real a-ha moment in audio was at a dealer that had M-1 Si vertically biamped with a pair of Krell KSA-250s in a large room. I have heard a number of 2 way monitors, and none are capable of doing what those speakers did in that room with those amps. I don't know that he has the right amp for either speaker as both are power hungry. The Mani is probably the better fit for that room. The Mirages need a big room with the ability to get them well out from the front wall.

50 watts is 50 watts.  The fact that an amp is Class A or SET dosn't make it more powerful.  As I said before, IMO its not enough power.  Sure you can play them with 50 watts and they can sound ok, but you'll never hear what the speakers are capable of. I tried them with several amps when I owned them and found that I needed 200 watts before they would open up.  Same size room as yours too.