2. cables
  3. 174809-168306

Ethernet patch panel and network switch question

Guys,

I have an ethernet patch panel in my office that I'm running ethernet to my Antipodes K40 music server.  I've been reading a lot about the NA EVO ethernet passive filter and am on the verge of pulling the trigger.  However, it seems that everyone recommends a network switch from the router.  My router is 2 floors down into the basement.  Do I need to run a switch from the patch panel on the wall to the ENO and then to the K40?  Do I need a switch at all?  TBH, I have no idea what the switch would do.  I'm asking b/c lots of folks are talking about the benefits of using a switch before the ENO.  Thanks.


Bill

wtb
david_ten
5,480 posts
 

+1

I'm going to give it a shot

david_ten
5,480 posts
 

Given your building’s history and restrictions....

It’s been an issue since I bought the building last year and we still haven’t found an acceptable work around. 

ALL electrical and networking wires are foamed in place.  This has caused problems for us as we can't upgrade anything.

 

Have you given thought to setting up a Mesh Network? It’s a solution for the audio side (and has broader application if you want it to).

Run a short length of ethernet cable from the Mesh Network Satellite to your K40.

The K40 was one of the options I was considering. It’s a great unit. I have a feeling it’s potential is being hobbled by your current setup.

You can still use the ENO filter after the Satellite, should you want to and should it add to overall performance.

wtb OP
35 posts
 

What is a mesh network?

Bill

fuzztone's avatar
fuzztone
5,510 posts
 

A mesh solidifies WiFi coverage. Often a short Ethernet from the mesh node outperforms a long cable as far as induced noise.

I thought a patch bay was a switch. If it's performing well enough don,'t worry about it.

david_ten
5,480 posts
 

@wtb run a google search

What is a mesh network?

 

Do you have a modem that feeds your router or a router that is both modem and router? I’m assuming a modem since you are running your ethernet lines through the patch panel. Assuming along these lines: Modem - Managed Switch - Patch Panel (in the basement).

If you have a modem:

Modem > Mesh Router (into the unit’s WAN;  this can be in your basement or elsewhere if you have an available direct line to your modem > Mesh Satellite (this will sit in your office) > Mesh Satellite’s LAN port > Antipodes K40

[Note: some Mesh Satellites are set up identical to the main unit, in other words they also have a WAN connection option]

Since I don’t know your ISP (and type; cable/fiber/other) and what type of router you are using, PM me with specific info.

There are a number of brands of Mesh Routers available. I use Netgear’s Orbi Pro for my audio network. I also have the ASUS AX6600. You will find a number of summary comparisons, reviews, and quick pointers for best model for specific application online.

More to discover