I had the croft and it is excellent but your speakers so sensitive I would look at a leben cs300 SH which is slightly sweeter than the croft.
A decent integrated amp under 2K ...
I'm looking for an INTEGRATED AMP. My speakers are Altec 620A (100 db efficiency) and my listening room is 14 x 21. I mainly listen to digital files from my DAC (Metrum) but sometimes I feel less lazy and put on a vinyl on my Garrard. I don't need a phono stage, I use the one from another integrated amplifier (Spendor D40). Here's my shortlist:
1) Belles Aria Integrated (slightly powerful for my needs)
2) Croft phono integrated (since I don't need a phono stage, I think it's a shame to burn tubes for nothing)
3) Rogue Sphinx V3 (too powerful for my needs)
FURTHER CONSIDERATIONS: I can live with tubes but only in the PREAMP section and I try to avoid Class A due to the heat. I'm open to Class D (proof: the Rogue) but the choice is limited and these devices come with a bunch of stuff I don't need. I rather spend my $ where it will make a difference.
regards
- ...
- 109 posts total
@axpert @hilde45 @elliottbnewcombjr @bigkidz @richdirector I specified that I did not want tubes in the output stage and I have my reasons for doing so. BTW I’ve had a few tube amps when I was young: Harman Kardon Citation II, Leak (TL 12), Quad II, Dynaco St-70 ... Each one sounded absolutely fabulous on my Altec VOT, which is by far the best speaker I’ve own ... I remember that these amps gave off a LOT of heat and required REGULAR maintenance ... I also had to change tubes and, in the 1980s, you had to find them first, which was not easy and could be expensive ... A matched pair of KT-88s cost $ 300 back then ($ 600 today) ... What I’m trying to say is that I know what a good tube amp sounds like and if I made the choice not to have one, I have my reasons. Thank you for respecting it! |
@oksailor : When I bought my Altec 620A, they were connected to a 200 watts Mcintosh amp that had powered them when they were in a recording studio. I managed to knock down walls, but in terms of subtlety, I was not impressed - and never was for that matter - with this or any other SS Mcintosh amps ... beyond their legendary build quality and reliability , I really don’t understand what attracts people ... the only Mcintosh amps I would consider are the old vintage tube devices ... these sounded really good but as soon as Mcintosh went SS it was a lot less interesting... |
@boomerbillone : in my experience amps have a sweet spot in terms of output volume ... some amps that I found mediocre at low volume turned out to be better at high volume and vice versa ... so it’s best not to have a powerful amp for nothing ... also, a powerful amp gives off more heat than a less powerful one (unless the less powerful is a class A) ... and the more an amp heats up, the faster its components deteriorate ... all this to say that I know my needs in terms of power ... my current amp is 34 watts per chanel and it’s more than enough for my needs ... |
@alaindexe Understood and it makes sense. Good luck with your search. I have started a couple threads about hybrid amplification, so I'm curious about what you're after. Best of luck! |
- 109 posts total