Bought the wrong subwoofer!


I was planning to buy a Rel subwoofer but stumbled across a good deal for a SVS sb-2000 pro so I decided to give it a try. Turns out that the the pre-outs on my integrated amp aren’t pre-outs at all but are rec outs (should have put on my glasses). The Svs doesn’t have high level inputs and my amp doesn’t have pre-outs so I’m screwed right? Guess it wasn’t such a great deal after all.

emiliop

have you considered buying a preamp with pre-out/main in.

ANY sub (self-powered), using line in/internal crossover/line (minus low bass) back to preamp is the best way

because

the self-powered sub’s amp takes the job of low bass, most of the power needs

the stereo amp driving the main speakers doesn’t need to make low bass, thus it can be lower power, less cost/size/weight, more placement options

and

main speakers don’t try and make low bass, thus they do a better job.

this is the best way to try tube amps with speakers of lower efficiency than horns, or other high efficiency ones.

Crazy idea but have you tried the rec out to the subs input? I’m not sure if it will work but it carries the same signal as pre out BTW you may want to read the owner manual on using the rec out and if you have to do something to initiate the rec out

I’m not sure that is a problem. The sub itself should attenuate the signal by setting the crossover and the gain/ volume. This is off the top of my head thinking but I have had my coffee. So I can’t even use that as an excuse if I am.

BTW what integrated are you using?

Also, you should call SVS and see what they recommend.. This is what you should do before proceeding. 

The sub itself should attenuate the signal by setting the crossover and the gain/ volume.

 

Doesn’t the preamp need to be able to attenuate the level of the sub? The sub amp won’t do that.

On another note, every sub I have owned has blended better with the main speakers using the high level inputs. I don’t even try with pre outs anymore.

 

Oz