Power Line Conditioners


I am fairly uneducated to the power conditions although I currently use a Panamax 1000+ in my system. Do all components need to go through the unit or simply the amps. I like the PS 300 but it only has 4 outlets. Please help me understand this subject better if you have the time. Thank you. Rick
rlambertaa54
The Panamax 1000 is NOT a line conditioner. I tis only a surge protector. If you want a huge difference for less money, try the Monster Cable HTS 1000 or 2000 power line conditioner. It is a true line conditioner as well as a surge protector. 90-95% of all amps should be plugged directly into the wall. To help them try an Audioprism Quiet Lines; they run in parallel.
The quality of the power coming from the PANAMAX is sometimes worse than what went into it. I measured it a couple of years ago and got rid of mine. Just because something is recommended in StereoShill doesn't mean it's any good. If you have a closet (To cover the noise) get a Hospital grade line conditioner. They're as good as if not better than any Audiophile unit and at a fraction of the price.
The PS Audio P300's four outlets are really intended for "line-level" components only (e.g., CD transport, DAC, preamp). It's not a line conditioner, but a "power regenerator." Yes, mine runs hot (it's essentially a 150 wpc amp, after all), but doesn't hum, and its effect on system performance has been to transform cardboard images into palpable performers and instruments.
Unless you have excessive or unusual noise I wouldn't use a pc, my suggestion is to go with quality aftermarket cords like BMI here at audiogon if possible. Also critical are dedicated lines for all your equipment - that can make a huge difference.
The PS Audio PP-300 outlets are used for source components and not amps.The four outlets will accomodate most audio systems and an add on extension box from PS Audio is available,but I think that a low cost Vans Evers Companion should work just fine.An internal fan currently available,can be purchased from PS Audio that will allow it to run cooler(but I have no concern about that so far with my 9 month old unit) and as far as unacceptable hum is concerned,this has occured on some of the earlier units and P S Audio will service any units that have this problem, through their transferrable warranty.These units also incorporate exceptional surge protection that is superior to many units(check their site for more details).A used PP 300 can occasionally be found for between $750.-$900.and sounds superior to any of the many PLC s that I have owned and have auditioned in my system.If you are not looking to buy the PP-300 power regenerator then the best sounding PLC that I ever heard,as well as owned within 1 k was a Vans Evers model 83 Reference.There are some special plc's dedicated for most power amps that are not high current and will protect as well as enhance the sound ,especially plugged into a dedicated line with a top Hubbell outlet.Happy hunting !