Why HiFi manufacturers don't make active crossovers anymore?

Anyone experienced the Luxman A-2003 tube active crossover? 

I think Naim still make Active crossover electronics.  They no longer manufacture the speakers to work with these units though. 

I can't speak to most of the crossovers mentioned in the thread. I use a Bryston 10B two way analog crossover with Magnepan 1.6's and 2 Arcam 10P 2 channel amplifiers. I removed the speakers passive crossovers and rewired the speaker panels to the binding posts. I was able to pick up the crossover and second amplifier used. IMO, it was time and money well spent. It really opened up and cleaned up the sound. 

The Bryston 10B is not as flexible as some of the digital crossover versions (i.e. - limited in slope and crossover point selections, and no room correction) but matches very well with the Magnepans as what choices are available with the Bryston are close to what the original passive crossovers were. I ended up liking different settings more than those matching the original passives.

I believe the Bryston and Pass analog active crossovers are still available and I see them used on rare occasions. Good luck with your project.

JS

@cosmicjazz --

... Accuphase still makes a digital one.

Appears that this devices are only still relevant in the Pro Audio world, why Home HifI abandoned the active cross over route? It’s correct to assume that?

If it’s the case that typical home hifi manufacturers have more or less "abandoned" active cross-overs (I wouldn’t know because I haven’t looked into it), then I’m not the one to decry that - as long as there are quality pro audio items still to be had, and much cheaper at that.

The main reason for my position on this, as indicated, lies in what is brought up by poster @steve59 in his mention of a Bryston DSP XO that retails for an alleged $13k; I can only assume other hifi manufacturers would follow or equal by example in a similar price range with claims to justify the elevated expense not unlike what Bryston has put forth, and yet a pro audio DSP XO like the Xilica XP-3060 retails for about 1/10 of that, measures excellently (even against much more expensive Lake products), and from what I’m able to assess it’s sonically very close to transparent as used in my own setup.

The Xilica unit doesn’t look like much nor caters to hifi aesthetics wrapped in its black, pro audio "clothing" and with rack mounting holes, but it fulfills its purpose as a professional, highly capable, pro audio tested and sonically close-to transparent DSP. In reply to the Bryston "showman" this is not just some plate amp, but a high quality DSP that still retails for about 1/10 of their product. I would dare anyone to put them head-to-head and do their objective findings.

I can only guess as to why active cross-overs aren’t represented by hifi manufacturers more than they are, but it appears active configuration as discrete components is mostly sought out in the DIY and pro arena, and as such is simply not a saleable item in the hifi milieu where active speakers are mostly whole package deals - be they run via DSP’s or "old fashioned" electronic cross-overs.

Myself I still only use the Xilica + amp-direct-to-driver for subs duties, but my main speakers with passive cross-overs are also run through the Xilica implementing a high-pass filter only (no delay or PEQ is used as-of-yet). I am considering by-passing the passive XO in the bass horn of my main speakers to run them fully active - this would be interesting for a variety of reasons. Going full-active with the mids and tweeter compression drivers is something I’ll likely avoid for the time being.

I prefer an active crossover. Adding one to my system was one of the biggest improvements I made. The clarity of the system improved immensely and I am able to play it at a much higher volume if I choose to since the mid/hi amps are not being sucked dry trying to reproduce the low bass signals.

I use a XTA DP448 which is a digital pro piece so no RCA connectors only XLR and it is fully electronically balanced.