High Fidelity Cables CT-1designed by Rick Schultz


In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
@sevenoranges if possible (based on your location) give HFC a phone call and ask them because they should have heard both and could describe sonic differences. By the way your question is an excellent one!
sevenoranges
I went from the UR power cord to the URH power cord. It is a step up, i had the UR power cord on my disc  player. I moved it to my preamp and add the URH power cord on my disc  player. There was a increase in sound for the better. not earth shattering but noticeable for me. Keep in mind that my system has a lot of High Fidelity products in it. I did not do a A/B comparison. To do it honestly i think you would have to remove all of the High Fidelity products from a system for a couple of days then start the comparison. I feel depending on where you compare the 2 power cords would all so make a difference (equipment used on). I did add a Pro power cord to the mix and that was night and day difference for the better. The power cords are not cheap so what is a good amount of increase for some may not be worth it to others. I would give the MC 1 Pros a listen. Cheaper than the URH power cord and a very nice increase in sound. Slower to break in than a power cord. But if you like what the other High Fidelity products did for your system . The MC 1 Pros will make you happy.
Report back on what you did or find.
Enjoy Pete 
The MC1s intrigue me. I was thinking of putting some 0.5s on the dedicated line that I use for the server (Memory Player) and the amp (Absolare). The raw power is a fed through UPS acting in effect like a voltage stabilizer. I hope it will still be effective. Perhaps I should try the MC1s a try instead of the speaker cable upgrade.
Sadly with limited resources it will be one or the other, sight unseen....or unheard.
sevenoranges
The MC o.5s are a good bang for the bucks. And for me work well with the MC 1 Pro. The MC 1 pro had a much longer break in than the .5s for me. i am `thinking about adding another MC 1 Pro to my system in the very near future. I have 21 MC O.5 on my 20 amp dedicated line for my amp. I like what they do.
Good luck Report back
Pete
21!!!
My God is it even worth getting two?
Or I could get two MC-01 only instead? or do they do different things or much of the same but with more intensity?
What is your recommendation please?