2. amps-preamps
  3. 136551-113867

In search of respectable/reasonable tube amps with 16 ohm taps

Looking for suggestions of respectable quality tube amps that are priced within reason (under $5k as a power amp or integrated, or more if the quality is represented) with 16 ohm taps.  Would prefer current models as used equipment presents it's own set of variables, but used is not out of the question.  Would consider mono blocks and realize there is typically a little more expense associated with them.  Before anyone says, "Have you considered . . .?" I probably haven't.  Thanks in advance for your suggestions.

This is my first post.  I've read a fair bit here, but I don't know all of the ins and outs of asking a question without potential flames, so I thought I'd just learn on the fly.  I have greatly enjoyed this forum.
kcpellethead
gsm18439
895 posts
 
You might call DejaVu Audio in Tyson’s, VA. They make their own tube amps using vintage parts. Try to talk to Vu. See what, if anything, he has to offer. 
salectric
747 posts
 
The photo of the underside of the EICO HF-35 amps is interesting.  The modifier has converted the amps to fixed bias rather than stock cathode bias, he is using a 12ax7 for the front end instead of the EF86, he improved the amp ground connections by using a buss bar instead of chassis connections, and he is using some very old Wonder Caps for the coupling capacitors.  It’s curious that he replaced the captive AC cord with an IEC socket yet he did not connect the earth tab on the IEC to the chassis.  While that will work fine electrically it means he isn’t taking advantage of the safety protection afforded by a 3-wire power cord.

All in all, the amps probably sound pretty nice but those old Wonder Caps should definitely be replaced by better sounding caps.  They were quite colored—-lean, bright and “plastic” sounding.  If these were my amps, I would replace the Wonder Caps with some Copper V-Caps and then sit back and enjoy the music.
kcpellethead OP
137 posts
 
Thank you all for your responses.  Time to start researching these.  Much appreciated.
elevick
2,636 posts
 
You shouldn't need to worry about 16 ohms.  Any amp with 8 ohm taps will be happy.  It's when your speaker impedance is much lower than your taps, usually...
noromance's avatar
noromance
9,545 posts
 
@salectric Agreed on the Wondercaps. My StuRem 35s have 3 chokes and K40Y caps. They sound amazing. 

More to discover