Anti skate. I think something's wrong


I have an Acoustic Signiture TT with a Graham 2.2 tonearm and Ortofon Cadenza Bronze cartridge. My anti skate is set close to tracking weight and it would always dig to in inside when I would start a record. I read this is wrong so I got my Cardas test record out and placed it in smooth section and it imediately gravitated to inside. I adjusted anti skate to where cartridge slighty pulls to inside . Here is the problem. To get this I'm having to adjust anti skate to the max. I rechecked TT and it is right on level wise. I have less sibilence now and swear the two channels are more even. The right channel has always been just slightly lower than left in volume. The only qualm I have is the max antiskate I have to use. Is bearing bad? I have the blue fluid. Or I shouldn't worry and enjoy the music. Mike
128x128blueranger

Lewm, you're welcome, and thank you for admitting, I am mooter than thou.

You're right about most linear arms lack of tangency. Often the pivot is playing catch-up, but to what degree is there alignment error and how does this compare to pivoted arms? 

Regards,

I suspect that there is always a tiny amount of tracking error and a tiny amount of skating force and that both are so small in magnitude and so relatively constant across the LP surface that these two qualities (small and constant, compared to a pivoted tonearm) account for why we hear linear trackers as sounding different from pivoted tonearms, although not perfect.
Lewn, while theory is a good place to start experiments, you still have to try it out in real life.  While it's possible that Peter Lederman was predisposed to look for that asymmetrical stylus wear to prove what he believed, it's also possible(and maybe more probable) that that's what he actually found.

BlueRanger,

We appear to have hijacked your thread with theorisations about antiskate (myself also guilty as charged). Getting back on topic I think you may be on the right track by checking levels.

Suggest checking :

  1. The platter using 2 small opposing spirit levels in 2 axes.

  2. The armboard (over its whole surface and in more than one axis). If the armboard is cantilevered/assembled there may be interference between armboard and chassis or the armboard itself may be distorted depending on what material has been used.

  3. If possible, the headshell or tonearm level.

The idea is that 1-3 should be always be “square” with each other in all axes.

If you can check the chassis itself that might be useful in case the main bearing/chassis itself was distorted or misaligned.

I’ve heard of turntables being shipped with heavy platter semi-assembled but decoupled suffering a warped main bearing in transit. Choice of materials could even lead to the chassis itself being warped. Either way a chassis error would undoubtedly reveal itself eventually.

 For the purpose I can recommend these :

 http://www.russandrews.com/bubble-level-twin-pack-50219990000/

 Let us know how you get on.

All the best,

I think all this discussion of anti-skate is interesting.   My object for deciding to us a/s or not is that when listening to a record, there is an ease in the sound that changes to something else when I apply a/s.  The object of all of this is to get sound that is closest to a live performance (I know that I can get it close but somehow..) Anyway...s/f is applied to counteract the inward moving force of the arm.  What we forget is that the arm is succumbing to that force by moving in that direction anyway.  I am a musician, not a physicist, but the thing simply sounds better on MY system with any cartridge I have installed with no a/s.  If that damages my stylus so be it....I don't have a balloon raise my car off the ground to safeguard my tires...just the cost of doing business.