What can you tell me about First Sound pre-amps?

Just heard from First Sound. Emmanuel will be on vacation until April 20th. He will call me back upon his return.

My experience mirrors that of the poster who suggested that the preamp's sound is just a bit lean. There is also a slight bite in the upper midrange/lower treble that has not ever disappeared, regardless of the fact that I've used different speakers systems, amps, interconnects, speaker cables, power cords and source. It's very good sonically, but the "colors" of the orchestra are not as rich as they should be. By the way, I've used 6922, 7308, 6DJ8 tubes, and the sonic signature is the same. Very low noise floor, but sometimes that happens by thinning out the sound. I recall the bass is not as powerful as, in fact, earlier stages, which can contribute to the impression of "faster" bass, but the mid/upper bass and lower midrange, for example, on a singer are less dimensional than in earlier (pre-2004) upgrades.

One other thing: I was reading an old TAS where Gordin Rankin of Wavelength was interviewed. He made the statement that he decided not to use Holco resistors because they had a slight "edge." This may contribute to that "bite" in the upper midrange I hear when brass is blown hard. Interestingly, that's the ONLY instrument that displays the edge, although the string section seems not quite as dimensional as it should be, too.

MPHNKNS, there are approx 16 model variants available for First Sound preAmps. Only Presence variants use Holco resistors. On the other hand Paramount variants use Vishay S102K resistors for the volume attenuators. On which model/variant have you experienced the lean sound? Which was the tube that gave you best results? (type brand date subtype)