Wilson Audio fuse box

Don't have your speakers, nor have they been heard by me but using a Hi-Fi Fuse in my Premier 16 preamp made a noticeable increase in clarity and purity of sound, so they may work as well or better for speakers.

I wouldn't try a preamp fuse in a speaker.

Tarsando good call but they may well make speaker fuses as well, don't know, just saying what my observations are.

Frankly, I didn't know there were any speakers that HAD fuses (except electrostatic).

Wilson doesn't use Fuses because they degrade sound quality. The drivers are however protected and customizable with replaceable resisters in the head unit. If you remove the panel behind the head unit with allen wrenches you will find two binding posts with a heatsink (aluminum plate) with two resister packs (they are extremely high quality resisters custom sourced by Wilson so contact your wilson dealer) If you see any solder coming out or the solder has turned brown on the input into the resisters you probably have damaged them, you dealer can check them with a volt meter to see if they are up to spec or degraded.

The Cool things about this design is you could have amplifier melt down and not damage your drivers...plus you can change the tonal characteristics with different values by telling Wilson what you like and down like about the sound.

...plus you can change the tonal characteristics with different values by telling Wilson what you like and down like about the sound.

That's the first time I've been made aware of that option. If true, Wilson just made points with me, it's a great engineering feature.

As a note. The Resistors are from Caddok. They can not be ordered from anyone but Wilson as they are OEM for Wilson only. And they work. No more Grateful Dead concerts at night until I get a new backup set.

You can do a "freshen up" on your speakers every year by replacing the resistors. Not a must unless you listen loud but it doesn't hurt.