will they go louder


Hello,

I just installed new electonics and tested them on my Maggie 3.5 speakers. Sounded great until I blew both fuses with the tweeters (my son turneed the volume up beyond what I'd listen to - the tweeters are OK still - not harmed).
Does anybody know if the new Maggie 3.7 or old 20.1 will go louder in the tweeter range without blowing fuses?

Best wishes,
Chris
nottop
Sounds real audio-that was elegantly simple great advice! My advice was too complicated.
Brad
No really stay with the recommended fuses. You might just move your listening position closer to the speakers. More volume and cheaper then new speakers.
my 3.6's register up to 100db and they are a great rock speaker, they require great amps and tons of power
Do you have 1W/1M spec of your speakers? Then calculate the theoretical max SPL of your system at 1 meter with the amps you have (it will be less due to room absorption). Then starting at 1 Meter, calculate -6dB less for each doubling of distance to your listening position; this is the theoretical max SPL of the system at your listening spot.

Maggies are not point source speakers -they are dipoles- so the rules are a bit different. At least this can help you get a rough idea of what's happening.

Can you lower the amp gain controls so your son cannot drive it to full output (the fuse popping point) using preamp gain?
Brad
Post removed 
Sounds like you might own the wrong speakers for your son to enjoy. Magnepans look like they should play at ear bleeding levels, but my experience is they wont in large rooms, or if you sit past 8ft from them. For reference I am speaking 98-100 db's or more.
Thank you for your responses. I think my amps are powerful enough - they are the Magtech amps with a lot of power into four ohms. They sound very good with the Maggie speakers. I don't usually plan to play speakers so loud - I think I could damage my hearing. But on the right occasion (such as when relatives come and want to blast out the room) it would be nice to be able to do this without blowing out a fuse. But I'd rather blow the fuse than the tweeters so I'll stick with the proper fuses.
I had 1.6 Maggies with an Innersound ESL amp (a special one with an extra big power supply) so it had about 1000 watts and they played insanely loud.

I have heard the 3.5 tweeter is a bit more sensitive than the QR but I do wonder if you have enough power myself...

08-19-11: Sounds_real_audio
It would be cheaper to upgrade your fuses.... go with 10 amp slow blows. Get rid of your son as well.
Sounds_real_audio (Threads | Answers | This Thread)

Stay with the proper fuse. They used it for protection, and it worked!
Post removed 
It would be cheaper to upgrade your fuses.... go with 10 amp slow blows. Get rid of your son as well.
Not a rock&roll speaker...if your has the son need to turn it up very loud? Then I suggest a pair of Klipsch speakers for him.