@kofibaffour I have the eversolo amp-6 ME gen2…in this way I use the minidsp as a preampli? I connect at the output the yamaha and the sub (no more connect to the yamaha) right?
Just a doubt...if I connect the streamer to the minidsp flex that still has a dac I don't convert 2 times? Or at least I don't lose the quality of the eversolo dac?
Which speakers are ideal to pair with a Yamaha as3200
Good morning everyone! I kindly ask you for advice on which speakers could be ideal to pair with my new Yamaha s3200 amplifier
I currently have some Kef LS50 meta but I would like to make a qualitative leap.
I have to buy Bookshelf with a maximum depth of 36 cm and a maximum width of 25
I'll also post a photo of the room. The important thing would be a large stage and a detailed sound... I won't listen to them at very high volume and I also have a Kef KC62 sub available that I can match in case.
Budget: Up to 6000 euros
My current ideas: ATC SCM20psl, ProAC D2R, Platinum 100 audio monitor
Thank you so much
- ...
- 31 posts total
Wait if you have the Eversolo which has streaming protocols, then yes, it becomes redundant to get the SHD which has streaming protocols. Do not get the SHD, get the MiniDSP Flex rather - https://www.soundimports.eu/en/minidsp-2x4-flex-trs.html?srsltid=AfmBOoqHP115osD3NFT2mqKbzW1dYGQBTQZGGCYbf4AIG2ufp8iBAxBr
So you output from your Eversolo to the MiniDSP via USB. Get this USB cable for that connection - https://www.amazon.de/Printer-Scanner-printers-Lexmark-Samsung/dp/B00P0FO1P0 Again I ask what will your phono stage be? @ercubano801 |
@kofibaffour i have the phono goldnote ph-10 all balanced |
Yeah then you plug the Phono stage into the balanced input of the Flex Balanced and you're good on that front too @ercubano801 So the DMP-A6 into the Flex balanced by USB cable as stated in my comment before yours and then from the goldnote, you use XLR/TRS cables to link the phono stage to the Flex Balanced and then you output from the flex Balanced with TRS/XLR cables into the AS3200 |
- 31 posts total