Whats a good low profile power conditoner/ surge p


Looking to up grade my current power conditioner. Was thinking about the PS Audio Power Plant Premier. Have not the best ac in the house. It is somewhat noisey. I have a Monster Power HTS-3500 now. I have been told it good for video sources but bad for audio sources. It is probably the weak link in my system. Any one have any other suggestions or experiences with the Power Plant?
hawkeye43
the one and only shunyata do it one time then forget audio the best hydra 4,6,
If you have a problem with noisy AC in the house, you should run 20A dedicated lines for your system before considering a power conditioner. It does not cost that much and has a better chance of fixing your noise issue.

Once you fix that problem, I'd recommend a Running Springs Audio Haley power conditioner.
Hawkeye, regrettably, most power conditioners are not worth owning because

1) they do not actually condition the AC,
2) they often times inject their own noise,
3) they often times rob the amplifier of the juice required to reproduce dynamic and/or complex passages thereby rendering the presentation fairly lifeless, lacking dynamics, and
4) most line conditioners do nothing to filter the bi-directional digital noise induced by every digital component such as a DAC or CDP so if your line conditioner is not dedicated and you have analog and digital components plugged into the same line conditioner, chances are excellent the line conditioner is inducing new digital noise into your analog components.

Some important things to note when considering line conditioning:

1) It's a bit like finding a needle in a haystack much for the reasons listed above.

2) Stay away from the most popular brand names. Regrettably, these are some of the worst offenders at doing nothing, injecting their own noise, robbers amps of the juice they need, or spreading digital noise around like a virus.

3) Seek a passive line conditioner that does not draw current to itself.

4) Seek a dedicated line conditioner that allows you to take full advantage of dedicated circuits/lines.

5) Seek a line conditioner that filters bi-directional digital noise. Digital noise is a nasty that will make its way back to the service panel and then into other circuits/lines and then spread into other components, especially those not properly conditioned.

6) One that actually conditions the AC. Believe it or not, this is rare.

Also, keep in mind that dedicated circuits/lines do nothing to condition the dirty AC coming in from the street. Dedicated lines serve exactly 2 purposes. 1) help keep noise from household appliances and dimmers from entering the component and 2) help ensure that high-current amplifiers have the juice required for dynamic and/or complex passages. Even sharing a 26 watt preamp on a line with a high-current drawing amp is just enough to suck the life out of the amp's performance.

Following these guidelines above will limit your selection down to about 2 or 3 manufacturers. But you will find it well worth your investment as you will soon discover that once you've discovered proper line conditioning, your tolerance for listening to any system that lacks it is down to about 10 minutes before ear fatigue sets in.

-IMO